Software Installation; Installation - TRENDnet TEW-421PC User Manual

SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless LAN
Adapter.
Windows 7/Vista/XP/2000/ME/98SE Utility and Driver Installation
1. Insert the 54Mbps IEEE 802.11g Wireless LAN Adapter Driver & Utility CD-
ROM and the Auto-run program will appear. Alternatively, open a file browser
and double click on the autorun.exe file located in the CD directory.
2. If you need to install the driver manually, refer each Windows OS to the
following CD-Rom directory path: D:\Driver\<Windows OS>.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using).
3. Click "Install Utility" to install the driver and software. Select 7/Vista/XP/2000
or ME/98 , depending on your operating system, and the install wizard will
begin installing the software. Follow the install wizard instructions to complete
the installation.
4. Follow the Install Shield Wizard Instructions. Click "Next" to continue and
finish it.
7