Table of Contents
Advertisement
26.
Select "Data encryption (WEP enabled)" option, but leave other option
unselected.
27.
Select the key format that you want to use to key in your Network key.
ASCII characters: 0~9, a~z and A~Z
HEX characters: 0~9, a~f
28.
Select the key length that you wish to use
40 bits (5 characters for ASCII, 10 characters for HEX)
104 bits (13 characters for ASCII, 26 characters for HEX)
29.
After deciding the key format and key length that you wish to use for network
key. Enter the network key in "Network key" text box.
Please note that that value of Network key entered, and key format/length us ed, must
be the same as that used in the Access Point. Although there are 4 set of keys can be
set in the Access Point WEP configuration, it's the first set of key that must be the
same as that we used by the supplicant wireless client.
30.
Click "OK" to close the Wireless Network Properties window, thus make the
changes effective.
MD5 Authentication
55
Advertisement
Table of Contents
