TRENDnet TEW-303PI User Manual page 15

22mbps wireless network pci adapter
Hide thumbs Also See for TEW-303PI:
Table of Contents

Advertisement

the PSDU. The Short Preamble and header may be used to minimize overhead and,
thus, maximize the network data throughput. Ho wever, the Short Preamble is
supported only from the IEEE 802.11b (High-Rate) standard and not from the original
IEEE 802.11. That means that stations using Short-Preamble cannot communicate with
stations implementing the original version of the protocol.
Power Mode: There are 3 modes to choose from
Continuous Access Mode (default) – the PCI Adapter is constantly operating
l
with full power and it consumes the most power
Maximum Power Save – the PCI Adapter consumes the least power and only
l
operates when there is wireless network activity.
Power Save – the PCI Adapter consumes the moderate level of power.
l
4X Config.: When "4X enable" is selected, you will be running 22Mbps PBCC+4X
mode, the wireless transmission speed can achieve over 12Mbps real throughput
assuming that the other wireless LAN devices are also running 22Mbps PBCC+4X.
Note!: 4X mode is proprietary transmission mode available only with our solution
chipset. In order to achieve superb speed by 4X or 22Mbps PBCC mode, both the
transmitting and receiving parties must be using our WLAN solution products.
For the changes made to any of the items above to be effective, click "Apply". The
screen will be changed back to Link Info. Page
15

Advertisement

Table of Contents
loading

Table of Contents