Table of Contents
Related Manuals for Hall Technologies HT-COMALERT-KIT
Summary of Contents for Hall Technologies HT-COMALERT-KIT
- Page 1 Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com HT-COMALERT-KIT Wireless Mic Receiver with Wireless Microphone & Charging Station USER MANUAL August 22, 2024 Hall Technologies August 22, 2024 Page 1 of 11...
-
Page 2: Table Of Contents
Audio Mode ........................14 Ducking ..........................14 System Tab ........................... 16 Device Info & Firmware Update ..................16 Login & System ......................... 17 API Command List ............................ 17 Specifications ............................18 Hall Technologies August 22, 2024 Page 2 of 11... -
Page 3: Introduction
Introduction OVERVIEW The HT-COMALERT-KIT, when combined with the HT-OSIRIS-DSP, is a cutting-edge solution for enhancing communication and safety in conference rooms, classrooms, and other settings requiring microphone systems. This innovative system includes a wearable wireless microphone with a panic button (HT- OSIRIS-DSP needed for panic button feature), a wireless receiver, and a charging station. -
Page 4: Package Contents
1 x HT-COMALERT-BASE Charging Base Station • 1 x USB-C Cable for connection to HT-OSIRIS-DSP • 1 x USB-C Cable and charging block for charging Base Station • 1 x Magnetic Lanyard with Safety Cord Hall Technologies August 22, 2024 Page 4 of 11... -
Page 5: Panel Description
HT-OSIRIS-DSP, audio signals are transmitted over USB-C cable. MIXED Line-level output with mixed microphone signals. MIC2 Line-level output for microphone #2 MIC1 Line-level output for microphone #1 ANTENNA Microphone antenna for receiving the wireless signal. Hall Technologies August 22, 2024 Page 5 of 11... -
Page 6: Installation
1. Position and install the mounting brackets (two at each side) using the mounting screws provided. 2. Repeat above step for the other side of the device. 3. Attach the brackets to the desired location. Hall Technologies August 22, 2024 Page 6 of 11... -
Page 7: Application Wiring
Application Wiring There are various different application methods with wiring examples; two are shown below. INTEGRATION WITH AMP-7040 AND SPK-IC6 INTEGRATION WITH DISCOVERY, HT-CAM-4K-DUAL & HT-OSIRIS-DSP Hall Technologies August 22, 2024 Page 7 of 11... -
Page 8: Microphone Use
Hold the side buttons again at the same time for more than 3 seconds to return to previous status. b. Return the wireless microphone to the charging base station. MICROPHONES OUT OF RANGE Hall Technologies August 22, 2024 Page 8 of 11... -
Page 9: Microsoft Teams
2. Adjust the lanyard around your neck with the goal of bringing the microphone as close to the presenter’s mouth as possible. a. NOTE: the lanyard has a break-away safety cord. Hall Technologies August 22, 2024 Page 9 of 11... -
Page 10: Zoom
2.57” x 1.12” x 0.58” (65.3mm x 28.4mm x 14.7mm) WM Net Weight 0.11 lbs. (0.05kg) WR Dimension (W x H x D) 2.83” x 0.51” x 2.09” (72mm x 13mm x 53mm) WM Net Weight 0.22 lbs. (0.1kg) Hall Technologies August 22, 2024 Page 10 of 11... -
Page 11: Web Gui
© Copyright 2024. Hall Technologies All rights reserved. 1234 Lakeshore Drive, Suite #150, Coppell, TX 75019 halltechav.com / support@halltechav.com (714)641-6607 Hall Technologies August 22, 2024 Page 11 of 11...
Need help?
Do you have a question about the HT-COMALERT-KIT and is the answer not in the manual?
Questions and answers