Displaying The Picture - Dukane ImagePro 8913-W User Manual

Displaying the picture

.
Activate your signal source. Turn the signal
source on, and make it send the signal to
the projector.
2.
To adjust volume, use the ▲/▼ cursor
buttons after pressing the VOLUME button
on the remote control.
To have the projector silent, press the MUTE
button on the remote control.
3.
Press the INPUT button on the projector.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to
select an input signal. Press the VIDEO
button for selecting an input signal from the
COMPONENT (Y, Cb/Pb, Cr/Pr), VIDEO
or S-VIDEO port, or the COMPUTER
button for selecting an input signal from the
COMPUTER IN1, COMPUTER IN2, HDMI
or MIU.
4.
Press the ASPECT button on the remote
control. Each time you press the button,
the projector switches the mode for aspect
ratio in turn.
5.
Use the zoom ring to adjust the screen
size.
6.
Use the focus ring to focus the picture.
NOTE • The ASPECT button does not work when no proper signal is inputted.
• For the details of how to adjust the picture, please see the "Operating Guide"
in the CD.
COMPUTER
VIDEO SEARCH
ASPECT AUTO BLANK
VOLUME button
MAGNIFY
HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
MUTE button
FREEZE MY BUTTON KEYSTONE
1 2
POSITION MENU
▲ cursor button
ENTER
▼ cursor button
RESET
ESC
INPUT button
VIDEO button
COMPUTER
VIDEO SEARCH
COMPUTER button
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
ASPECT button
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
POSITION MENU
ENTER
RESET
ESC
Focus ring
Zoom ring
9