THE MANUFACTURER DECLINES ALL RESPONSABILITY FOR ANY DAMAGE CAUSED BY AN UNPROPER USE OF THE MACHINE AND/OR IN ENVIRONMENTAL CONDITIONS OUT OF THE ALLOWED RANGE. WARNING BEFORE BEGINNING THE USE OF THE MACHINE READ CAREFULLY THIS WHOLE MANUAL. THE OPERATION LISTED BELOW CANNOT BE PERFORMED BY THE USER. A LICENSED INSTALLER INTERVENTION IS NEEDED.
DESCRIPTION (see figure 1) 1. Ball-taps with OR gasket. 2. OR gasket-type unions for an easier installation. 3. Double stainless steel net filters for water impurities. 4. No-return valves. 5. Regulation knob for setting temperature, with reference scale. 6. Key STOP/C for manual stop or eventual clearing of memory. 7.
INSTALLATION WARNING : THE INTERVENTION OF A LICENSED INSTALLER IS NEEDED • In the case of hard water (with high limescale content = hardness in French degrees higher than 25-30) it is necessary to employ an ion exchange water softener. This unit must be calibrated so as to maintain a residual hardness ranging between 5 and 10 French degrees.
OPERATING INSTRUCTIONS • Switch on the doser using the external switch (or by plugging in the flying socket) • Set desired water quantity using + and – keys. Setting appears on display (13). Increments/decrements may be obtained in three different ways : 1.
! If after 10-12 seconds the anomaly reoccurs probably the internal litre counter is faulty. Request technical assistance. • All displays and led indicators remain off : Check the fuse located next to the power supply plug, the housing can be opened with a screwdriver.
IT IS STRICTLY FORBIDEN TO USE NOT ORIGINAL SPARE PARTS ! Figure-3 shows the machine section indicating the different components of the device and the following Table lists their description with relevant spare parts code numbers. WM35 SPARE PARTS DESCRIPTION CODE...
The purchaser is responsible for having the equipment properly installed, operated under normal conditions with proper supervision and to perform periodic preventive maintenance. If any parts are proven defective during the period of one year from date of purchase, Doyon Equipment Inc. hereby guarantees to replace, without charge, F.O.B. Linière, Quebec, Canada, such part or parts.
Need help?
Do you have a question about the WM35 and is the answer not in the manual?
Questions and answers