Advertisement
Quick Links
Q uic k Re fe re nc e G uide
Read Me First
1
1. MemoryFrame
1
2. Software CD
9
3. Users Manual
4. Power Supply
3
5. Easel Stand
6. USB Cable
6
7. Quick reference guide and
4
5
wireless set up (this document)
10
7
8. Internet Photo Sharing set
up guide (green)
2
5
8
9. Snap on Picture Frame
Check Contents of package
10. USB wireless adapter (optional)
2
Place the CD into your computers
CD-ROM drive. Follow the on
screen installation instructions.
Note: If the installation wizard
does not start after a few
moments go to the windows start
menu, select "Run" then browse
to your CD drive and select
SETUP.EXE from the CD drive
and press enter. Then follow the
on screen wizard.
After installation the Digital
PixMaster software will launch.
Install the software CD
3
Plug in the external power supply
as shown.
Power receptacle
4
Connect the power cable
Make sure to connect the power
cord of the power brick
to a domestic power outlet.
Connect USB cable to the USB
receptacle marked PC
For a complete list of compatable Wireless USB dongles go to www
F unction and menu buttons
For more information on
configuring the slide show
on the MemoryFrame,
uploading from a USB
enabled camera, or
playing from a memory
card reader. Please
consult the full manual
included in this package.
Enjoy your new
MemoryFrame
For wireless and USB device connection see reverse side of this page
5
Connect USB cable to the computer
.DSIcentral.com
Since the MemoryFrame USB
driver is not digitally signed,
Microsoft Windows® XP users
may see this screen during the
install process: Press "Continue
Anyway" to continue with the
installation.
Connection panel
After installation completes
click "Finish" you are then
ready To start creating a slide
show.
After turning on the unit a "Found
new hardware" message will pop up
on the computer screen
6
7
If this message appears wait
a few moments for the"Found
New Hardware Wizard" to
launch
Power on the unit
USB Driver inst allation
11
Enjoy your new slideshow on
Enjoy your slide show
10
Use PixMaster to build your slide
show. After you are happy with
the slideshow you have built
select "Send Slideshow" from the
Digital Frame menu option.
After a few moments the
MemoryFrame will display your
slide show.
G o to the P ixMas ter s oftware applic ation
Drag-n-drop photos from your
computer into PixMaster
9
The software you are installing for this hardware:
Pacific Digital MemoryFrame
Has not passed Windows Logo testing to verify its compatibility
with Windows XP. (Tell me why testing is important.)
Continuing your installation of this software may impair
or destabilize the correct operation of your system either
immediately or in the
future. Microsoft strongly
recommends that you stop
this installation now and
cont act the hardware vendor for
Wi nd ow s Logo testing.
Windows L ogo tes ting mes s age
8
In the"Found New Hardware
Wizard" window click on "Next >"
then check the "Install the
software automatically" and
click "Next". The wizard will then
install the driver for the unit
Found New Hardware Wizard
sof tware that has passed
Advertisement
