Playback; Playing Components; Playing Blu-Ray Disc / Dvd Players; Ipod ® Playback - Denon AVR-790 Owner's Manual

Playback

n Operation Flow
B efore starting playback, make the connections between the
different components and the settings on the receiver.
Playing Components (vpage 38)
n
Playing Blu-ray Disc/DVD Players (vpage 38)
n
iPod® Playback (vpage 38)
n
Listening to FM/AM Broadcasts (vpage 39)
n
Listening to SIRIUS Satellite Radio Programs
(vpage 40)
n
Operations During Playback (vpage 42)
Selecting the Surround Mode (vpage 42)
q Standard Playback (vpage 42)
w Playing in a DENON original surround mode
(vpage 43)
e Direct Playback (vpage 43)
r Stereo Playback (vpage 44)
t Playing the Pure Direct mode (vpage 44)
Adjusting the Sound Field Effects (Parameter)
(vpage 44)
NOTE
Also refer to the operating instructions of the connected
●
components when playing them.
External devices can be controlled by remote control unit
●
(vpage 52 "Operating the Connected Devices by Remote
Control Unit").

Playing Components

Playing Blu-ray Disc / DVD Players

The following describes the procedure for playing Blu-ray disc/
DVD players.
Use the same procedure to play other components.
1
Prepare for playback.
①
T urn on the power of the TV, subwoofer and player.
②
Set the TV's input to the AVR-790.
③
Load the disc in the player.
2
Turn on the AVR-790's power.
(vpage 17 "Turning the Power On")
3
Press
and select the input
source.
If "TUNING PRESET" is selected for
preset channel, press before turning
.
4
Play the component connected to
the AVR-790.
Make the necessary settings on the
player (language setting, subtitles
setting, etc.) beforehand.
5
Use
to adjust the volume.
H – – – –80.0dB ~ 18.0dB
G Variable range
※
The variable range differs according to the input signal and channel
level setting.
6
Select the desired surround mode.
(vpage 42 "Selecting the Surround Mode")
7
Adjust the desired sound field effects.
(vpage 44 "Adjusting the Sound Field Effects")
iPod ® Playback
The music / video on an iPod can be played by using the control
dock for iPod (ASD-1R, ASD-11R, ASD-3N or ASD-3W sold
separately).
Connect the control dock for iPod beforehand. (vpage 14
"iPod ® ").
Listening to music on an iPod ®
Front
1
Prepare for playback.
q Set the iPod in the DENON control dock
for iPod.
w Assign the control dock for iPod's input
(vpage 33).
e S et to "MAIN/TV"
2
Turn on the AVR-790's power.
(vpage 17 "Turning the Power On")
3
Press to select the input source assigned in step 1-
above.
w
OK to disconnect.
(iPod screen)
b If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
ENGLISH
Front
to "MAIN".
Front
See overleaf