Page 2
FREE HIGH QUALITY INTERCOM. PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE FIRST USE. IF INSTALLED, OPERATED AND MAINTAINED ACCORDING TO THIS MANUAL THE iriBelt III WILL BE A RELIABLE PARTNER FOR MANY YEARS TO COME. THOMAS B SVENNINGSEN CO-FOUNDER OF IWCS...
LED indicator Page: 3.4 Charging Page: 4. Service And Maintenance 4.1 Specifications Page: 4.2 Cleaning Page: 4.3 Warrenty Page: 4.4 Service and upgrades Page: 4.5 Maintenance Page: Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 10/24FA...
Page 4
Anyone relying on this information should acquire the most current version e.g. upon request at info@iwcs.eu IWCS is not responsible for the content or accuracy of any translations or reproductions, in the whole or in part, of this manual from any other source.
Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture and intended use of the equipment. IWCS assumes no liability for the customer’s failure to comply with these requirements.
Unboxing 2.1 In The Box 1 x iriBelt III* 1 x User Manual *Cable type and connector type depends on the headset. 1 x USB to USB-C Cable Inductive charging plate Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu...
When selected, press When selected, press MODE MODE button to save. button to save. *= Refer to page 8 **= Refer to page 9 Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 10/24FA...
Page 8
Press & hold for 25 sec: Master Reset / Range setting Press & Hold for >30 sec: Automatic OFF From ON Position: Press & Hold for 2 sec: Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 10/24FA...
Page 9
Flash BLUE Fast Flash Pairing mode BLUE Slow Flash Paired / Active Flash / 5 sec Low Battery Flash Charging When fully charged light turns OFF Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu V. 10/24FA...
Page 10
When the Low Battery level is reached, the Status LED on the front, will flash RED every 5 seconds. To charge iriBelt III place the unit on top of the QI wireless charging pad. The Status LED will flash RED every 2 seconds, as long as the battery is being charged. When the battery is fully charged the Status LED will stop flashing and turns off.
Part number IR-20-2012OBK-01-_____ 4.2 Cleaning Do not use chemicals or solvents to clean your iriBelt III. Use only fresh water. Pressure, friction, sharp objects, etc. can damage the product and the warranty may be void. 4.3 Warranty iriBelt III is covered by a two (2) year warranty.
Need help?
Do you have a question about the iriBelt III and is the answer not in the manual?
Questions and answers