Akw Onyx AKW02810BKLS Installation Instructions

Onyx Bathroom Seat
Installation Instructions
Installation steps:
Attention Installer -Warning: Max Load 200 kg (depending on wall type). Please read all instructions carefully before
installation and leave this manual with the end user for future reference.
1.
4.
1. Place the seat bracket against the wall and mark the height needed for the back plate.
2. When marked, remove the seat and place the wall bracket up against the wall. Using a level, mark the hole positions
out making sure that the bracket is horizontal. Drill the holes and insert the appropriate fittings.
3. Position the bracket over the holes and insert appropriate fittings to secure in place.
4. Hook the seat onto the top of the bracket and lever down until the seat bracket cover is parallel to the wall.
5. Insert the two 4 x 16 screws on the bottom of the bracket to secure the seat in place.
AKW guarantees your Onyx product with a lifetime guarantee from the date of purchase. Life time guarantee applies only to manufacturing defects, faulty
materials, or poor workmanship. This guarantee excludes general wear and tear through usage and does not apply to surface finishes or any damage caused
by inappropriate cleaning. Do not use scourers or abrasive cleaners which may affect the surface finish as this will invalidate your guarantee.
This life time guarantee also excludes any accidental damage, inappropriate use or damage that results from any modifications, repairs or lack of
maintenance including the build-up of lime scale, waterborne debris, or surface damage from water freezing. This does not cover any damage caused by not
following these installation instructions. For installation issues always contact your local installer first. Installer may resolve any present issues or choose
to contact AKW. Within this period, AKW will decide to repair or replace as applicable. Work is to be undertaken only by AKW or our approved agents with
prior agreement. Failure to install this AKW product in accordance with supplied instructions or the making of unauthorised modifications will invalidate
any warranty and will affect product safety.This guarantee is in addition to your statutory and other legal rights, and becomes effective from the date of
purchase. To validate the guarantee, you must retain proof of purchase. None of the foregoing affects your statutory rights.
Website
www.akw-ltd.co.uk
Installer - please read all instructions carefully before installation
and leave this manual with the end user for future reference
© 2017 AKW
468mm
Orderline
+44 (0)1905 823 298
UK
Colour Range:
2+3.
5.
4 x 16 Screws
Technical Enquiries
01905 560219
technicalenquiries@akw-ltd.co.uk.
16-004-050-01
UK
UK
UK
UK
UK
UK