Lippert Solera 2024013806 Manual

Purpose
This document outlines removal and replacement of the LED lights on Solera® awnings.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the Lippert limited warranty.
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause death
or serious personal injury if not performed safely and within the parameters set forth in this manual.
Failure to follow the instructions provided in this document may result in death, serious injury, unit
The "CAUTION" symbol above is a sign that a procedure has a safety risk involved and may cause
personal injury or product and/or property damage if not performed safely and within the parameters
Resources Required
• 1-3 people, depending on task
• Cordless or electric drill or screw gun
• Glue
Rev: 07.26.24
AWNING RGB LIGHT REPLACEMENT
damage, or voiding of the component warranty.
set forth in this manual.
Moving parts can pinch, crush or cut. Keep clear and use caution.
AWNINGS
• Silicone sealant
• Sharp scissors
• Silicone lubricant spray
Page 1
CCD-0004345