Dell Vostro 200 Owner's Manual page 119

10 Place the card in the connector and press down firmly. Ensure that the card
is fully seated in the slot.
1
5
1 PCI Express x16 card
4 PCI Express x1 card
slot
11 Replace the card retention bracket ensuring that:
• The guide clamp is aligned with the guide notch.
• The tops of all cards and filler brackets are flush with the alignment
bar.
• The notch in the top of the card or filler bracket fits around the
alignment guide.
2
2 securing tab
5 PCI Express x16 card
slot
Removing and Installing Parts
3 PCI Express x1 card
3
4
119