Page 1
2. Printer: Model DPU-S245 3. Specified Serial Interface cable (Refer to picture.#2) *Comes with DPU-S245 printer. No need to additionally buy 4. Printer cable: Model: 3887-07 (micro USB – RS-232C cable (Refer to pic. 3)) * Optional item. Customer must additionally buy 2.
Page 2
3. Before start to print… Before starting to use the printer with 3887, first you have to change the baud rate of the printer. Read the below and change the settings. How to change the baud rate of the S245 Printer Highlighted bold text indicates directions the printer will print.
Page 3
13) DIP SW-4 Change Setting? :Press Power 14) DIP Switch setting mode : Press Power The printer is now configured to work with your Kanomax 3887. Make the test printing After finishing up the dip switch setting, make sure to conduct the test printing so that the setting has been changed properly.
Need help?
Do you have a question about the DPU-S245 and is the answer not in the manual?
Questions and answers