Page 1
Yoshino B2000 SST Solid-State Portable Power Station USER MANUAL V1.01 Please read this manual carefully before use and keep it for future reference.
Page 2
7. Yoshino recommends that you use genuine Yoshino accessories. Yoshino shall not be responsible for any damage or expense that might result from the use of parts other than genuine Yoshino parts.
Page 5
B2000 SST Portable Power Station Charging Cable Car Cigarette Lighter Solar Charging Charging Cable Cable MC4 to XT60 DC5521 to Female Cigarette User Manual Lighter Car Output Cable Thank You Card Warranty Card...
Overview Main Power Button LED Light APP Connectivity Button LED Light On/Off USB On/Off DC On/Off USB-C Outputs DC Outputs USB-A Outputs LCD Screen...
Page 8
Solar/Car Input AC Input Overload Protectioin AC On/Off Wireless Charging Area AC Outputs...
Page 9
Input Power Overload Warning Solar/Car Input Battery Failure Warning Low Temp Warning AC Input High Temp Warning APP Connectivity LCD Screen Output Power USB-C Output Wireless Charging Battery Level USB-A Output Remaining Time 100W AC Output DC Output Recharging Time...
Charge Tip: Fully charge your power station before usage or long-term storage. ·AC Charging To charge the device, plug one end of the AC Charging Cable into the AC Input, and the other end into a 110-125V power source. *Tip: When AC recharging is not available, check to see if the overload protection button is turned on.
Page 11
·Car Charging Plug one end of the Car Charging Cable to the Cigarette Lighter of your vehicle, and the other end to the Solar/Car Input of the power station. *Tips: 1) Please recharge the product through a 12V/10A car charger. 2) Make sure the car is started before using car charging.
Page 12
(not included) can quickly charge the device to 80% in around 2.5 hours (using three SP200 solar panels). 2) When using a Yoshino solar panel to charge the product, please follow the instructions that come with the solar panel. 3) Before connecting the solar panel, please ensure that the solar...
1) If the device is not operated for 30 seconds (primary settings, you can adjust the screen time through the Yoshino app), the LCD Screen will turn off. When you start to use the product again, the LCD Screen will turn on automatically.
You can monitor, control and customize your portable power station through the Yoshino APP. ·App Connectivity Button Press and hold the App Connectivity Button for 3 seconds until you hear a beep. While the power station is connecting with the app, the icon on the LCD Screen will flash.
Page 15
·Registration 1. Launch the “Yoshino” app, 2. Enter your e-mail address 3. Enter the verification code. and tap "REGISTER". and tap "NEXT". 4. Set a password 5. Enter your registration and tap "NEXT". information and log in.
Page 16
·APP Connection 1. Enable "Wi-Fi" and 2. Tap the "+" button and 3. Select Bluetooth or Wi-Fi "Bluetooth" from your select your device. connection as needed. * If you have any questions during smartphone's settings. connecting, please contact our customer service. 4.
Page 17
·Firmware Update 1. Select the device you 2. Tap the settings button 3. Select "Firmware" from want to update from the located in the top right the device settings menu. home page. corner of the app. 4. Select "EMS/BMS/MPPT 5. Tap "UPDATE". /INV"...
Connections ·AC Output Press the AC On/Off button until it lights up to turn on AC power. Connect your devices to the power station using an AC charging cable. Press the button again to turn off AC power. *2000W *Tip: When connecting the portable power station to a refrigerator or any device requiring a continuous power supply, ensure the AC Standby Time setting in the app is set to "Always On".
Page 19
·USB Output Press the USB On/Off button until it lights up to turn on the power. Connect your devices to the power station using a USB cable. Press the button again to turn off the power. 100W USB-C PD USB-C 5V/2.4A X 2 USB-A ·DC Output...
(Uninterruptible Power Supply) To enable the UPS function, connect your portable power station to a wall outlet using an AC charging cable. Then, press the AC On/Off button and plug your devices into the power station's AC Output. *Tips: 1) This device supports off-grid UPS. In the event of a sudden blackout, it will automatically switch to inverter mode within 20ms.
Page 23
1326Wh, Capacity 40.92V, 32.4Ah Solid State Battery Type Li-NCM 16.2Ah 4000 Cycles to Cycle Life 80%+ Capacity AC Output (Rated) 2000W AC Output (Surge) 3000W Warranty 5 Years 31.3 lbs Net Weight 14.2 kg 17.5 x 8.6 x 9.1 inches Dimensions 445 x 218 x 231 mm 100-120VAC, 50/60Hz...
Page 24
12-60VDC/10A Max Solar Input 600W Max 4 Outlets, AC Output 120VAC, 50/60Hz, 2000W Total 2 Ports, 12.6VDC/10A, 12V DC Output 126W Total 5VDC/1A, 9VDC/1.1A, Wireless Charging 12VDC/1.25A, 15W Max 2 Ports, USB-A Output 5VDC/2.4A, 12W Each Port 5VDC/3A, 9VDC/2.22A, USB-C Output 12VDC/1.66A, 20W Max 5-15VDC/3A,...
Page 26
Symbol Problem Battery Charging High Temperature Protection Battery Charging Low Temperature Protection AC/Solar/Car Charging High Temperature Protection Battery Discharged High Temperature Protection Flashing Battery Discharged Low Flashing Temperature Protection AC Output High Flashing Temperature Protection USB Output Overload Protection Flashing Flashing Flashing AC/USB-C/USB-C PD/DC Output...
Page 27
DC On/Off button, it will resume normal operation automatically. Electrical appliances should be used within rated power. If the prompt appears on the screen and does not disappear after restarting, stop using it immediately and contact Yoshino customer service.
Exclusions Yoshino's warranty covers the product as long as it is used in its intended manner, and will not cover any of the following: * Product that has been abused, misused, or otherwise not operated within the parameters of the literature provided with the product.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment.
Page 30
For FAQs and More Information, Please Visit: YoshinoPower.com SUPPORT 1 (800) 513-2797 customersupport@YoshinoPower.com Operating hours are 8:00 am - 4:30 pm PST (M-F).
Need help?
Do you have a question about the B2000 SST and is the answer not in the manual?
Questions and answers