Advertisement
Quick Links
www.24inControl.com
346 Rheem Blvd. #108A Moraga, CA 94556
LiftMaster MyQ Retrofit with Internet Gateway (828LM) and Control Panel (888LM/889LM)
Integration Guide
Required items
1. MyQ Control Panel (888LM/889LM)
2. MyQ Internet Gateway (828LM)
3. Compatible door opener
Connect MyQ Internet Gateway
1. Connect Ethernet cable to router and the internet gateway.
2. Connect power to the internet gateway.
3. When the internet gateway connects to the internet, the green light stops blinking and lights solid green. If the green light
does not light solid, check the power, router, and internet connections to the internet gateway.
4. Write down the serial number on the gateway to be used in the registration process
Advertisement
Related Manuals for Chamberlain 888LM
Summary of Contents for Chamberlain 888LM
- Page 1 346 Rheem Blvd. #108A Moraga, CA 94556 LiftMaster MyQ Retrofit with Internet Gateway (828LM) and Control Panel (888LM/889LM) Integration Guide Required items 1. MyQ Control Panel (888LM/889LM) 2. MyQ Internet Gateway (828LM) 3. Compatible door opener Connect MyQ Internet Gateway 1.
- Page 2 MyQ Internet Gateway LED guide Register the Internet Gateway using the customer website Note: The Internet Gateway cannot be registered through Alarm.com if it is already registered through MyQ/LiftMaster. The Internet Gateway must be removed from the user's MyQ account before attempting to register it to Alarm.com. 1.
- Page 3 12. Return to the Garage page and click Check for New Devices. 13. Repeat steps 6-9 if initially unsuccessful. Also, verify the model number of the garage door opener to verify it is compatible. Troubleshooting • If the yellow command LED does not turn on, reverse the wires connected to the R and W terminals of the control panel. Replace the wire if necessary.
Need help?
Do you have a question about the 888LM and is the answer not in the manual?
Questions and answers