Subscribe to Our Youtube Channel
Related Manuals for Nabis WRAS OPTIMA 50
Summary of Contents for Nabis WRAS OPTIMA 50
- Page 1 1/2" Brass Optima 50 OPTIMA 50 (Dual Flush Valve) / INLET VALVE 99T ASSEMBLY INSTRUCTIONS P00997...
- Page 2 Preparing the mechanism Measure the cistern - h: (from the top of the lid to the inside base of the cistern) - d: (diameter of the hole in the lid) In the table below, choose the right level for the overflow shortening ➊...
- Page 3 Setting water level After having connected your inlet valve to the water supply, open the tap and set the level of the long flush using the inlet valve (see overleaf). Note: The max. water level should be 20 mm lower than the overflow tube.
- Page 4 1) Do not over tight in any case. 2) Do not use any sealing paste and/or compound in any case NABIS will be not responsible in case these warnings are not respected. Wolseley UK Ltd, Harrison Way, Leamington Spa, Warwickshire CV31 3HH. UK Technical helpline: 0161 681 2120 www.wolseley.co.uk...
Need help?
Do you have a question about the WRAS OPTIMA 50 and is the answer not in the manual?
Questions and answers