Ryobi ACPB2 Quick Start Manual

ACPB2 WOOD BRUSH
ACPB3 SCOURING BRUSH
ACPB5 UNIVERSAL BRUSH
FOR USE WITH P2904 RYOBI PATIO
SWEEPER
WARNING:
To reduce the risk of injury, user must
read and understand the operator's
manual for their patio cleaner and this
instruction sheet. Always wear eye
protection with side shields marked
to comply with ANSI Z87.1. Ensure
compatibility and fit before using this
accessory. Do not use this accessory
if a part is damaged or missing. If you
are not comfortable performing any
of the functions described in these
instructions, take your unit to a qualfied
service center.
REMOVING/INSTALLING
THE ROTATING BRUSH
ASSEMBLY
See Figure 1-3.
To remove the rotating brush:
 Remove the battery pack.
 Depress the latch on the right end
cap and remove it from the motor
head.
 Slide the rotating brush away from
the appliance.
To install the rotating brush:
 Slide the rotating brush beneath the
deflector and onto the shaft on the
left end cap.
 Position the right end cap on the
side of the motor head.
 Rotate the deflector until it is aligned
with the right end cap.
 Push the right end cap onto the mo-
tor head until the shaft goes through
the center of the brush and the end
cap snaps into place.
Fig. 1
B
E
A - Right end cap (bouchon droit, tapa de extremo
derecho)
B - Motor housing (boîtier du moteur, alojamiento del
motor)
C - Latch (loquet, pestillo)
D - Shaft (arbre, eje)
E - Deflector (dégonfleur, deflector)
Fig. 2
A
B
A - Left end cap and deflector assembly (ensemble de
déflecteur et bouchon gauche, conjunto de tapa de
extremo izquierdo y deflector)
B - Shaft (arbre, eje)
C - Rotating brush (brosse rotative, cepillo giratorio)
Fig. 3
C
A
D
C