Table of Contents
Advertisement
Section - Configuration
Channel Width:
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Transmission Rate:
Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Visibility Status:
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-660. If Invisible is selected,
the SSID of the DIR-660 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your
DIR-660 in order to connect to it.
Wireless Security:
Refer to page 65 for more information regarding wireless security.
D-Link DIR-660 User Manual
6
Advertisement
Table of Contents
