Umts/Hsdpa Setup - D-Link DIR-451 User Manual

Secton  - Configuraton
Country-ISP-Card: This will divide connection into following three types.
Country: Select the card issue country from the first
drop-down menu.
ISP: Select the card issue provider from the second
drop-down menu.
Card: Select the card name from the third drop-down
menu.
User Name: Enter your username for your UMTS/HSDPA connection.
Enter your Password for your UMTS/HSDPA connection.
Password:
Enter your Password again for confirmation.
Retype Password:
Enter the name of your network server (optional).
Server Name:
The default is *99***1#. This field should not be altered
Dial Number:
except when required by your service provider.
Enter the access point name (APN).
APN:
Select Enable to have the router automatically reconnect to the Internet if the connection is dropped.
Auto-Reconnect:
Keep Alive Interval: Enter the time to send keep alive package. If user does not input any keep alive sever at below, it will keep
send keep alive package to the default server. (www.dlinkddns.com, ntp1.dlink.com, www.dlink.com, www.
dlink.com, www.d-link.com.tw). If all servers fail to response, the 3G router will hang up 3G connection and
re-dial to carrier/operation.
Enter the IP address(es) of keep alive server(s). If user inputs keep alive servers, this router will send keep
Keep Alive Servers:
alive package to those servers. If those servers fail to response, the 3G router will hang up 3G connection
and re-dial to carrier/operation.
D-Lnk DIR-451 User Manual

UMTS/HSDPA Setup

14