Hearth Technologies DM1836 Installation Instructions

INSTALLATION INSTRUCTIONS
These bi-fold glass doors have been tested for use with specific Hearth & Home Technologies fireplaces and are listed as fireplace
parts. Refer to the fireplace installation instructions/owner’s manual for the correct accessories to be used. Check with your local
building code agency before you begin your installation to ensure compliance with local codes, including the need for permits and
follow-up inspections. If you encounter any problems regarding code approvals, or if you wish clarification of any of the instructions
contained here, contact your local distributor/dealer, or please contact Technical Services, Hearth & Home Technologies Inc.,
1-800-927-6841 or 1-888-427-3973.
Glass doors must not be used to hold oversized logs or other burning material inside the fireplace. This may cause the
glass to break. All fires should be contained within the grate/refractory area. Never leave an open fire unattended even
though the glass doors are closed. When firing, doors must be fully closed or fully open with screens drawn.
10/03
DM1836/DM1842
BI-FOLD GLASS DOORS
WARNING!
4039-151 Rev B
T I E M # D E S C R P I T O I N
1 B - i o f d l D o r o A s s
2 B - i o f d l D o r o A s s
3 L a c t h B a r k c t e
Note:
Before burning the fireplace for the
first time, wipe the trim with a clean, dry rag
to remove all smudges and fingerprints.
Failure to do so will cause smudges and
fingerprints to be burned into the finish of
the trim.
Q T . Y
, . y L H 1
, . y R H 1
2
1