Moki Element Instruction Manual

8
7
6
5
4
Overview
1. Volume up/Skip track forward
2. POWER ON/OFF Multi Function Button (MFB)
3. Volume down/Skip track back
4. Battery charging indicator LED
5. AUX port
6. Type-C charge port
7. Microphone
8. Bass boost ON/OFF
Button Functions
Play/Pause music: Press MFB
Power ON: Press & hold MFB for 3 seconds
Power OFF: Press & hold MFB for 5 seconds
Wireless pairing: Press & hold MFB for 5 seconds
Answer/End call: Press MFB
Reject call: Press & hold MFB for 2 seconds
Volume up: Press + button
Volume down: Press - button
Skip track forward: Press and hold + button
Skip track back: Press and hold - button
Bass boost ON/OFF: Press button 8
Reset: Press and hold - & + buttons for 5 seconds
Element
Wireless Headphones
Contents
• 1 x Moki Element Wireless Headphones
• 1 x Type-C to USB-A Charge Cable
• 3.5mm to 3.5mm Audio Cable
Charging
1
2
3
• Please charge headphones before first use.
• Connect the included charge cable to a USB port on a PC or USB charge adaptor (USB-A connector).
• Confirm orientation and connect the Type-C connector to the port on your headphones.
• The LED on the headphones will glow solid red indicating the headphones are charging.
• Depending on the power of the charge port used, the charge time will be approximately 2-4 hours.
• When the headphones are fully charged, the LED will turn off.
• Disconnect the charge cable.
Note: The headphones will not work if the charge cable is still connected.
Pairing
You must pair the headphones with a device before they will function wirelessly. You only need to pair your
headphones to each play device once.
The headphones will automatically reconnect to each device when in wireless range. If two or more devices are
available, the last device paired will be the reconnected device.
For wireless playback with an audio device, make sure the distance is within 10 meters. Certain environments may
affect the working distance.
1.
2.
3.
4.
5.
6.
7.
Note: If headphones do not pair with a new device within 90 seconds they will enter "Standby mode".
Enable pairing on your play device.
Press and hold the MFB button for approximately 5 seconds until the LED starts blinking red/blue.
Your headphones are now ready to be paired with your play device.
Search for "Moki Element" from the list of available devices on your play device.
Select "Moki Element" to pair the headphones with your play device.
When pairing is successful, the LED on your headphones will glow solid blue.
Adjust the volume on your play device to the desired level.