Contents Overview Customise Your Fit Activate Inter-pairing Connecting & Pairing Playing Music Phone Calls Recharge ChargeDock Turn Off PairBuds Recharge PairBuds Charge a USB Device LED Indicator Technical Specifications Troubleshooting Safety Information...
Please read all information and warnings before using PairBuds. Improper use may lead to the product being damaged or lost. Care must be taken to ensure a secure fit. Strenuous or high impact activity may cause buds to dislodge.
Tilt the PairBud slightly forward and insert the tip into your ear Secure the fit by rotating each PairBud until it feels comfortable. If PairBuds move or feel loose when gently shaking your head try the next size or use memory foam buds.
LED’s glow solid (about 2-3 hours). Full charge of the PairBuds will take about 1 hour. INTER-PAIRING The “L” and “R” PairBuds inter-pair with each other by THE PAIRBUDS default. The user can simply take out both PairBuds from the ChargeDock and they will inter-pair to each other automatically.
INTER-PAIRING Once the PairBuds have been turned ON, the “L” Pair- THE PAIRBUDS Bud LED will flash red/blue while the LED on the “R” (continued) PairBud will flash blue. You may then pair the PairBuds with your Bluetooth device. If the PairBuds fail to pair a reset is required.
CONNECT TO A Moki PairBuds can only connect to Bluetooth enabled BLUETOOTH audio devices. Make sure you turn ON / Enable DEVICE Bluetooth on the device. In your devices settings: Go to Bluetooth. Turn “ON” Available Devices will soon update, - “MOKI PairBuds”...
MAKING OR MAKING A CALL: PairBuds may be used as a headset RECEIVING when making mobile phone or VoIP calls. Ensure your CALLS device / app is set to “Play calls through Bluetooth when available” or similar. ANSWER INCOMING CALL: When your phone rings the music will pause and you will hear “incoming”...
CHARGING THE Put the PairBuds in their magnetic ChargeDock ports. PAIRBUDS The PairBuds LED will glow solid red to indicate that they are charging. PairBud recharge time: Approx. 1 hour TURNING OFF Press and hold the PairBud control button for...
1.5A will safely charge as normal. Some device manufacturers may use different configurations or have unique charging requirements. You will need to have a USB cable compatible with your device. Moki cannot guarantee this product will charge all devices (maximum output 1.5A / capacity 2200mAH).
Buds charge time: Approx. 1 hour (Fully charged ChargeDock = Approx 20 PairBud recharges) Note: Take care when charging. It is normal for the PairBuds and ChargeDock to get warm during charging and discharging. Do NOT cover or charge in wet environments.
PairBuds don’t turn on when removed from SHOOTING the ChargeDock • Make sure the ChargeDock and PairBuds are charged. • Place the PairBuds back in the ChargeDock remove again after 3 seconds. • Switch on manually by holding each PairBud button.
• Disconnect the ChargeDock when fully charged. • Do not connect input and output ports to each other. • PairBuds are not a toy. Children using them should be supervised & have volume monitored by an adult. • Keep out of reach of young children and pets.
Page 16
Moki International all rights reserved Made in China The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Moki is under license. Other trademarks and trade names are those of their respective owners.
Need help?
Do you have a question about the PAIRBUDS and is the answer not in the manual?
Questions and answers