1. Manuals
  2. Brands
  3. Vecom Manuals
  4. Computer Hardware
  5. ECS-4000
  6. User manual

Vecom ECS-4000 User Manual

Intel core i7/ i5/ i3 (broadwell-u) slim embedded system high performance, rugged, extended temp, power protection
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ECS-4000
Intel
®
Core™ i7/ i5/ i3 (Broadwell-U) Slim Embedded System
High Performance, Rugged, Extended Temp, Power Protection
USER
USER
Manual
Manual
1.3.0 Edition 20210317

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECS-4000 and is the answer not in the manual?

Questions and answers

Related Manuals for Vecom ECS-4000

Summary of Contents for Vecom ECS-4000

  • Page 1 USER USER ECS-4000 Manual Manual Intel ® Core™ i7/ i5/ i3 (Broadwell-U) Slim Embedded System High Performance, Rugged, Extended Temp, Power Protection 1.3.0 Edition 20210317...

  • Page 2: Record Of Revision

    Record of Revision Version Date Page Description Remark 0.10 09/25/2015 Preliminary Release 1.00 10/16/2015 Official Release 1.10 01/02/2018 16, 37 Update 1.20 04/09/2018 76-79 Update 1.30 03/17/2021 2, 4, 6, 8, 23 Update...

  • Page 3: Declaration Of Conformity

    Disclaimer This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation or any infringements upon the rights of third parties, which may result from such use.

  • Page 4: Order Information

    Order Information Part Number Description ECS-4000- ECS-4000 Slim Embedded System, Intel ® Core™ i7-5650U PoER650U Processor (Broadwell-U), 6 GbE LAN with 4 PoE , 2 Front-access SSD Tray, 4 COM, 6 USB, Isolated DIO ® ECS-4000- ECS-4000 Slim Embedded System, Intel Core™...

  • Page 5: Optional Accessories

    Optional Accessories Part Number Description M340L-W28M1 Vecow DDR3L 4GB 1333/1066 MHz RAM, Wide Temperature -40°C to +85°C DDR3L8G Certified DDR3L-1600 8G RAM DDR3L4G Certified DDR3L-1600 4G RAM PWA-120W 120W, 24V, 90VAC to 264VAC Power Adapter with 3-pin Terminal Block PWA-120WM4P 120W, 24V, 90VAC to 264VAC Power Adaptor with 4-pin Mini-DIN Connector PWA-160W-WT...

  • Page 6: Table Of Contents

    1.5.1 Dimensions of ECS-4000-PoER 1.5.2 Dimensions of ECS-4000-PoE 1.5.1 Dimensions of ECS-4000-2G 1.5.2 Dimensions of ECS-4000-2R CHAPTER 2 GETTING TO KNOW YOUR ECS-4000 2.1 Packing List 2.2 Front Panel I/O Functions 2.3 Rear Panel I/O and Functions 2.4 Main Board Expansion Connectors 2.5 Main Board Jumper Settings...
  • Page 7 3.3 Installing Mini PCIe Cards 3.4 Installing Antenna Cable 3.5 Installing CFast Card and SIM Card 3.6 Installing SSD/HDD 3.7 Mounting ECS-4000 CHAPTER 4 BIOS AND DRIVER SETTING 4.1 BIOS Settings 4.2 Main Menu 4.3 Advanced Function 4.4 Chipset Function 4.5 Boot Function...

  • Page 8: Chapter 1 General Introduction

    36V wide range power input with up to 80V smart surge protection, 16-mode configurable ignition power control, fanless design and -25°C to 70°C operating temperature, just integrated in a 1.9"-height chassis, ECS-4000 is ready to customize for your requirements. Vecow ECS-4000 Series Slim Embedded System delivers outstanding...

  • Page 9: Product Specification

    1.3 Product Specification 1.3.1 Specifications of ECS-4000-PoER System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket...
  • Page 10 ® LAN 3 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 4 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 5 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 LAN 6 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel ®...

  • Page 11: Specifications Of Ecs-4000-Poe

    1.3.2 Specifications of ECS-4000-PoE System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket I/O Interface...
  • Page 12 ® LAN 3 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 4 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 5 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 6 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 Power...

  • Page 13: Specifications Of Ecs-4000-2G

    1.3.3 Specifications of ECS-4000-2G System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket I/O Interface...
  • Page 14 Power Power Input 6V to 36V, DC-in Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground • Mini-DIN 4-pin Ignition Control 16 Mode (Internal) Remote Switch 3-pin Terminal Block : On, Off, IGN Surge Protection Up to 80V/1ms Transient Power Others Optional Infineon SLB9665 supports TPM 2.0, LPC Interface...

  • Page 15: Specifications Of Ecs-4000-2R

    1.3.4 Specifications of ECS-4000-2R System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket I/O Interface...
  • Page 16 Power Power Input 6V to 36V, DC-in Power Interface • 3-pin Terminal Block : V+, V-, IGN, Frame Ground • Mini-DIN 4-pin Ignition Control 16 Mode (Internal) Remote Switch 3-pin Terminal Block : On, Off, IGN Surge Protection Up to 80V/1ms Transient Power Others Optional Infineon SLB9665 supports TPM 2.0, LPC Interface...

  • Page 17: Supported Cpu List

    Up to 1.90 GHz Pentium 3825U Up to 1.90 GHz Celeron 3765U Up to 1.90 GHz Celeron 3755U Up to 1.70 GHz Celeron 3215U Up to 1.70 GHz Celeron 3205U Up to 1.50 GHz ©Vecow ECS-4000 User Manual GENERAL INTRODUCTION...

  • Page 18: Mechanical Dimensions

    1.5 Mechanical Dimensions 1.5.1 Dimensions of ECS-4000-PoER Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) 1.5.2 Dimensions of ECS-4000-PoE Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) GENERAL INTRODUCTION...

  • Page 19: Dimensions Of Ecs-4000-2G

    1.5.1 Dimensions of ECS-4000-2G Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) 1.5.2 Dimensions of ECS-4000-2R Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) ©Vecow ECS-4000 User Manual GENERAL INTRODUCTION...

  • Page 20: Chapter 2 Getting To Know Your Ecs-4000

    ● HDD Tray Key 2.2 Front Panel I/O Functions In Vecow ECS-4000 series family, all I/O connectors are located on front panel and rear panel. Most of the general connections to computer device, such as USB, DVI-D, DisplayPort and any additional storage, are placed on the front panel.

  • Page 21: Reset Tact Switch

    USB 2.0 RESET CFast POWER It is a hardware reset switch. Use this switch to reset the system without power off the ECS-4000. Press the Reset Switch for a few seconds, then reset will be enabled. 2.2.2 Power Button LAN1 LAN2...
  • Page 22 Flash card. It is implemented by a SATA II Port from Broadwell-U PCH. Be sure to disconnect the power source and unscrew the CFast socket cover before installing a CFast card. The ECS-4000 does not support the CFast hot swap and PnP (Plug and Play) functions.

  • Page 23: Dvi-D Connector

    SIM 2 USB 3.0 USB 2.0 RESET CFast POWER Onboard DisplayPort connection supports up to 3840 x 2160 resolutions at 60Hz. DP1 (eDP) does not support hot plug, HDMI, and DVI. ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...
  • Page 24 There are 2 USB 3.0 connections available supporting up to 5GB per second data rate in the front side of ECS-4000. They also comply with the requirements of SuperSpeed (SS), High Speed (HS), Full Speed (FS) and Low Speed (LS).
  • Page 25 POWER There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet ® connections in the front side of ECS-4000. LAN 1 is powered by Intel 218LM Ethernet engine; LAN 2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled.

  • Page 26: Rear Panel I/O And Functions

    On | Off LAN4 LAN6 LAN3 LAN5 ECS-4000 supports 6V to 36V DC power input by terminal block in the rear side. In normal power operation, power LED lightens in solid green. ECS-4000 supports up to 80V surge protection. Pin No. Definition Earth GND 2.3.2 Remote Power On/ Off Switch...
  • Page 27 OUTPUT 5 INPUT 6 OUTPUT 6 INPUT 7 OUTPUT 7 DI_COM DIO_GND DIO_GND External 24~78VDC Input GPI SINK Mode Isolated GPI input circuit in SINK mode (NPN) is illustrated as follow : ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...
  • Page 28 GPI SOURCE Mode Digital GPI input signal circuit in SOURCE mode (PNP) is illustrated as follow : GPO SINK Mode Digital GPO output circuit in SINK mode (NPN) is illustrated as follow : GETTING TO KNOW YOUR ECS-4000...

  • Page 29: Serial Port Com

    (5-wire) (9-wire) (3-wire) TXD- TXD- DATA- TXD+ TXD+ DATA+ RXD+ RXD+ ----------- 1, 2 RXD- RXD- ----------- 3, 4 ----------- RTS- ----------- ----------- RTS+ ----------- ----------- CTS+ ----------- ----------- CTS- ----------- ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...

  • Page 30: Poe (Power Over Ethernet) Ports

    LAN6 LAN3 LAN5 There are 4 RJ45 connectors in the rear side of ECS-4000. It supports IEEE 802.3at (PoE ) Power over Ethernet (PoE) connection delivering up to 25.5W/ 48V per port and 1000BASE-T gigabit data signals over standard Ethernet Cat 5/ Cat 6 cable.

  • Page 31: Main Board Expansion Connectors

    2.4 Main Board Expansion Connectors 2.4.1 Front View of ECS-4000 Main Board With Connector Location BIOS CN15 CN17 CN16 CN19 Battery CON1 CN18 JP10 JP11 2.4.2 Rear View of ECS-4000 Main Board With Connector Location PLX-8608 ©Vecow ECS-4000 User Manual...
  • Page 32 The pinouts of Miscellaneous port are listed in following table: Group Pin No. Description HDD_LED_P HDD LED HDD_LED_N FP_RST_BTN_N RESET BUTTON PWR_LED_P POWER LED PWR_LED_N FP_PWR_BTN_IN POWER BUTTON GETTING TO KNOW YOUR ECS-4000...
  • Page 33 2.4.4 CON1, J2 LVDS CON1 ECS-4000 supports dual-channel 24-bit LVDS display, up to 1920 x 1200 pixels resolution. The pin assignments of CON1 are listed in the following table: Pin No. Definition Pin No. Definition Pin No. Definition PANEL_VDD TXO0-...
  • Page 34 CN17 CN19 There are 2 onboard high performance Serial ATA III (SATA III) on ECS-4000. It supports higher storage capacity with less cabling effort and smaller required space. The pin assignments of CN17 and CN19 are listed in the following table: Pin No.
  • Page 35 2.4.6 J1, J3 : SATA Power Connector The ECS-4000 also equip with 2 SATA power connector. It supports 5V (Up to 2A) and 12V (Up to 1A) current to the hard drive or SSD. The pin assignments of J1 and J3 are listed in the following table: Pin No.
  • Page 36 2.4.7 J4 : Internal USB The ECS-4000 main board provide one expansion USB port using plug-and- play for Dongle Key or LCD touch Panel. The USB interface supports 480 Mbps transfer rate which comply with high speed USB specification Rev. 2.0.
  • Page 37 Pin-43 forces the respective pin on the socket to ground, or logic 0. IP11 Pin-43 is defined for switching mSATA/ Mini PCIe device, the header definitions are listed in the following table : Header Interface Auto Detection Mini PCIe mSATA ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...
  • Page 38 Reserved Status Reserved +3.3Vaux Reserved +3.3Vaux USB_D+ USB_D- PETp0 PETn0 SMB_DATA SMB_CLK +1.5V PERp0 PERn0 +3.3Vaux PERST# Reserved reserved Reserved Mechanical Key UIM_VPP REFCLK+ UIM_RESET REFCLK- UIM_CLK UIM_DATA CLKREQ# UIM_PWR Reserved 1.5V Reserved WAKE# 3.3Vaux GETTING TO KNOW YOUR ECS-4000...
  • Page 39 The pin assignments of CN16 are listed in the following table: Pin No. Signal Name Pin No. Signal Name Reserved +3.3Vaux Reserved Reserved +1.5V Reserved Reserved Reserved +3.3Vaux Reserved +3.3Vaux USB_D+ USB_D- PETp0 PETn0 SMB_DATA SMB_CLK +1.5V PERp0 PERn0 +3.3Vaux ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...
  • Page 40 2.4.10 Battery Battery The ECS-4000’s real-time clock is powered by a lithium battery. It is Equipped with Panasonic BR2032 190mAh lithium battery. It is recommended that you not replace the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team.
  • Page 41 Pin No. Function LAN2_SDP0 LAN2_SDP3 LAN2_SDP1 LAN2_SDP2 2.4.12 CN15 : +12V_SB Output CN15 The pin assignments of CN15 are listed in the following table: Pin No. Function Pin No. Function +12V_SB +12V_SB ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...

  • Page 42: Main Board Jumper Settings

    2.5 Main Board Jumper Settings 2.5.1 Front View of ECS-4000 Main Board with Jumper Location The figure below is the top view of the ECS-4000 main board which is the main board used in the ECS-4000 Series system. It shows the location of the jumpers.
  • Page 43 JP5 provides LVDS voltage selection function, closing Pin 1, 2 is for 3.3V LVDS power input; closing Pin 2, 3 is for 5V LVDS power input. Pin No. Function Pin No. Function +3.3V (Default) ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...
  • Page 44 2.5.4 JP6 CMOS/ME CMOS Header Header Normal Normal Clear CMOS Clear ME 2.5.5 JP7 External USB3.0/2.0 Power Select Header Power Header Power +5V Standby Power +5V System Power GETTING TO KNOW YOUR ECS-4000...
  • Page 45 2.5.7 JP10 : MCU Spy-bi Wire Interface for Download FW JP10 The pin assignments of JP10 are listed in the following table: Pin No. Function Pin No. Function 3.3V_MCU MCU_RST# MCU_PRG ©Vecow ECS-4000 User Manual GETTING TO KNOW YOUR ECS-4000...

  • Page 46: Ignition Control

    3.3V 3.3V 2.6 Ignition Control ECS-4000 series provides ignition power control feature for in-vehicle applications. The built-in MCU monitors the ignition signal and turns on/ off the system according to pre-defined on/ off delay period. GETTING TO KNOW YOUR ECS-4000...
  • Page 47 2.6.1 Adjust Ignition Control Modes ECS-4000 series provides 16-mode adjustable power on/ off delay period via DIP-Switch. The default DIP-Switch is set to 0 in ATX/ AT power mode. The modes are listed in below table: DIP-Switch Power on delay...
  • Page 48 Note: 1. DC power source and IGN share the same ground. 2. ECS-4000 supports 6V to 36V wide range DC power input in ATX/AT mode. In Ignition mode, the input voltage is fixed to 12/24V for car battery scenario. 3. For proper ignition control, the power button setting should be “Power Down”...

  • Page 49: Chapter 3 System Setup

    SYSTEM SETUP “Please make sure to assemble the system in an anti-static environment.” 3.1 How to Open Your ECS-4000 3.1.1 ECS-4000-PoE/ ECS-4000-2G Step 1 Remove 5pcs KHS#6-32 screws (circled in red) and 2pcs#4-40 screws (circled in yellow) on the front panel.
  • Page 50 Step 3 Remove 4pcs F#6-32x6 screws (circled in red) in the bottom side. Step 4 Remove 1pcs KHS#6-32 screw (circled in red) on the rear panel. Step 5 Turn over ECS-4000 to keep the bottom side up. Then do open the bottom cover carefully.

  • Page 51: Ecs-4000-Poer/ Ecs-4000-2R

    3.1.2 ECS-4000-PoER/ ECS-4000-2R Step 1 Counterclockwise loosen the locks on each SSD/ HDD Tray. Step 2 Remove the SSD/ HDD Tray from ECS-4000-PoER/ ECS-4000- Step 3 Remove 5pcs KHS#6-32 screws (circled in red) and 2pcs#4-40 screws (circled in yellow) on the front panel. (ECS-4000-PoER/ ECS-4000-2R) Step 4 Take off the front panel.
  • Page 52 Step 5 Remove 4pcs F#6-32x6 screws (circled in red) in the bottom side. Step 6 Remove 1pcs KHS#6-32 screw (circled in red) on the rear panel. Step 7 Turn over ECS-4000 to keep the bottom side up. Then do open the bottom cover carefully.

  • Page 53: Installing Ddr3L So-Dimm Modules

    3.2 Installing DDR3L SO-DIMM Modules Step 1 Install DDR3L RAM module into SO-DIMM slot. (ECS-4000-PoER/ ECS-4000-PoE/ ECS-4000-2G/ ECS-4000-2R) Step 2 Make sure the RAM module is locked by the memory slot. (ECS-4000-PoER/ ECS-4000-PoE/ ECS-4000-2G/ ECS-4000-2R) ©Vecow ECS-4000 User Manual HARDWARE INSTALLATION...

  • Page 54: Installing Mini Pcie Cards

    3.3 Installing Mini PCIe Cards Step 1 Install Mini PCIe card into the Mini PCIe socket. (ECS-4000-PoER/ ECS-4000-PoE/ ECS-4000-2G/ ECS-4000-2R) Step 2 Fasten 2pcs M2.5 screws. (ECS-4000-PoER/ ECS-4000-PoE/ ECS-4000-2G/ ECS-4000-2R) HARDWARE INSTALLATION...

  • Page 55: Installing Antenna Cable

    3.4 Installing Antenna Cable Step 1 Check Antenna cable and washers. Step 2 Remove 3pcs rubber cork on rear panel. (Pick up the location you want) ©Vecow ECS-4000 User Manual HARDWARE INSTALLATION...
  • Page 56 Step 3 Put Antenna cable connector into the hole on rear panel. Step 4 Fasten the washer 1, washer 2 and washer 3 on Antenna cable connector. Step 5 Antenna cable is installed ready. HARDWARE INSTALLATION...

  • Page 57: Installing Cfast Card And Sim Card

    3.5 Installing CFast Card and SIM Card Step 1 Remove 2pcs M3x4 Flat head screws on CFast & SIM Card cover on front panel. Step 2 Remove CFast Card and SIM Card cover from front panel. ©Vecow ECS-4000 User Manual HARDWARE INSTALLATION...
  • Page 58 Step 3 Insert CFast card and push to lock. Step 4 Before Inserting SIM card, make sure the system power is not plugged. Step 5 Insert SIM card and push to lock. Step 6 SIM card and CFast card are installed ready. HARDWARE INSTALLATION...

  • Page 59: Installing Ssd/Hdd

    Take the bottom cover from ECS-4000-PoE/ ECS-4000-2G. (Please refer to 3.1.1) Step 2 Loosen 8pcs M4x4 screws (circled in red) on the bottom cover. Step 3 Remove the SSD/HDD bracket from ECS-4000 bottom cover. ©Vecow ECS-4000 User Manual HARDWARE INSTALLATION...
  • Page 60 Step 4 Put 2.5" SSD/HDD into the bracket. Step 5 Fasten 4pcs M3 screws to fix the SSD/HDD on the bracket. Step 6 Fix the SSD/HDD bracket with M3x4 screws. HARDWARE INSTALLATION...
  • Page 61 Step 7 Cable to the SSD/HDD. ©Vecow ECS-4000 User Manual HARDWARE INSTALLATION...
  • Page 62 3.6.2 ECS-4000-PoER/ ECS-4000-2R Step 1 Counterclockwise loosen the locks on each SSD/HDD Tray. Then remove the SSD/HDD Tray from ECS-4000-PoER/ ECS-4000-2R. Step 2 Fix the SSD/HDD on the SSD/HDD Tray with 2pcs M3x4 Flat head screws. HARDWARE INSTALLATION...
  • Page 63 Step 3 Put the SSD/HDD Tray back. Step 4 Clockwise fasten the locks on each SSD/HDD Tray. ©Vecow ECS-4000 User Manual HARDWARE INSTALLATION...

  • Page 64: Mounting Ecs-4000

    3.7 Mounting ECS-4000 Step 1 Ensure the screw holes on the right and left side of upper case match the ones on ECS-4000 wallmount bracket. Step 2 Fasten 4pcs KHS#6-32 screws. HARDWARE INSTALLATION...

  • Page 65: Chapter 4 Bios And Driver Setting

    BIOS setup program is accessed by pressing the <Del> key after the Power- On Self-Test (POST) memory test begins and before the operating system boot begins. The menu bar is shown below. Figure 4-1-1: BIOS Menu Bar BIOS AND DRIVER SETTING ©Vecow ECS-4000 User Manual...

  • Page 66: Main Menu

    4.2 Main Menu Figure 4 2: BIOS Main screen 4.2.1 BIOS Main Menu Figure 4-2-1: BIOS Main screen System Time/ Date Press “TAB” key to switch sub-items of value .Then press “ +” key or “-“ key number key for modify value. In this page, you could make sure CPU type and DRAM type that you installed into this system.

  • Page 67: Advanced Function

    This system support ACPI function as auto process. You should Enable/ Disable that depend as your OS. Enable Hibernation It is able to use Hibernate function if OS support. But some OS may not be effective with this function. BIOS AND DRIVER SETTING ©Vecow ECS-4000 User Manual...
  • Page 68 4.3.2 CPU Configuration Figure 4-3-2: CPU Configuration setup screen Intel Virtualization Technology This for Virtualization Application or platform usage, when enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. BIOS AND DRIVER SETTING...

  • Page 69: Sata Configuration

    [IDE] / [AHCI] / [RAID]. For the RAID mode operate, please see appendix E. for detail information. Serial ATA Port 0 to Port 3 This system offers 4 SATA port for connection SATA device. BIOS AND DRIVER SETTING ©Vecow ECS-4000 User Manual...

  • Page 70: Amt Configuration

    4.3.4 AMT Configuration Figure 4-3-4: AMT Setup screen Intel AMT ® Enables or Disables Intel Active Management Technology BIOS extension. This option just controls the BIOS extension executes. BIOS AND DRIVER SETTING...

  • Page 71: Serial Port 1 Configuration

    IO=3F8h; IRQ=4; • IO=3F8h; IRQ=3,4,12; • IO=2F8h; IRQ=3,4,12; • IO=3E8h; IRQ=3,4,12; • IO=2E8h; IRQ=3,4,12; Interface Mode There are 3 options as follow : • RS-232 Mode • RS-422 Mode • RS-485 Mode BIOS AND DRIVER SETTING ©Vecow ECS-4000 User Manual...

  • Page 72: Serial Port 2 Configuration

    4.3.6 Serial Port 2 Configuration Figure 4-3-6 : Serial Port 2 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO addresses and interrupts resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...

  • Page 73: Serial Port 3 Configuration

    IO=3E8h; IRQ=12; • IO=3E8h; IRQ=3,4,12; • IO=2E8h; IRQ=3,4,12; • IO=2F0h; IRQ=3,4,12; • IO=2E0h; IRQ=3,4,12; Interface Mode There are 3 options as follow : • RS-232 Mode • RS-422 Mode • RS-485 Mode BIOS AND DRIVER SETTING ©Vecow ECS-4000 User Manual...

  • Page 74: Serial Port 4 Configuration

    4.3.8 Serial Port 4 Configuration Figure 4-3-8 : Serial Port 4 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO address and interrupt resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...

  • Page 75: Chipset Function

    Figure 4-4-1 : Network Setup screen PCH LAN Controller Enable or Disable on board network device. Wake on LAN Enable or Disable integrated LAN to wake the system. This function also can active by O.S. BIOS AND DRIVER SETTING ©Vecow ECS-4000 User Manual...

  • Page 76: Boot Function

    4.5 Boot Function Figure 4-5: Boot function Setup screen 4.5.1 Boot Option Figure 4-5-1 Boot Option Setup screen Boot option When you press “Enter”, you can select which device you would like to boot. BIOS AND DRIVER SETTING...

  • Page 77: Appendix A : Isolated Dio Guide

    CN16-GPIO A.2 Function Description The ECS-4000 offers a 16-bit DIO (8-DI/ 8-DO) 20-pin terminal block connector. Each bit of DI and DO equipped with a photo-coupler for isolated protection. All I/O pins are fixed by Hardware design and cannot change in/out direction in runtime process.
  • Page 78 EXT_IN5 GPIO Input 5 EXT_OUT5 GPIO Output 5 EXT_IN6 GPIO Input 6 EXT_OUT6 GPIO Output 6 EXT_IN7 GPIO Input 7 EXT_OUT7 GPIO Output 7 DI_COM GPIO COM Reserved EGND GPIO GND E24V External 24V DC Signal Circuit of Input NPN Digital GPIO input signal circuit in SINK mode (NPN) is illustrated as follow.

  • Page 79: Software Package

    There are 2 folders inside : Driver Folder DIO Demo Tool Folder A.4 Driver Installing Supports Windows 8.1 and Windows 7. Please do make sure your OS version before installing. Please select “Add legacy hardware” on device management Appendix A ©Vecow ECS-4000 User Manual...

  • Page 80: Appendix B : Gpio And Wdt Functions

    APPENDIX B : GPIO and WDT Functions B.1 Function Description The WDT are using internal Super I/O function. However, you must entry super I/O configuration mode to set it. Super I/O special address port = 0x2E Super I/O special data port = 0x2F GPIO Logical device is 0x07 B.2 Entry Functions 1.

  • Page 81: Appendix C : Power Consumption

    APPENDIX C : Power Consumption ECS-4000 Power Consumption Testing : ECS-4000 Storage- Aux card CFast Storage- Transcend SSD370 SATA Aux card SATA 0 SSD 64GB Storage- Power Chroma 62006P-100-25 SATA 1 Source Power Source : Standby Mode Input Power Max Current...
  • Page 82 Power-on and boot to Win7 64-bit Idle Status : Run 100% CPU usage CPU usage less 3% Current Consumption Current Consumption i7-5650U 2.200A 13.20W 3.600A 21.60W i7-5650U 1.430A 12.87W 2.250A 20.25W i7-5650U 1.070A 12.84W 1.610A 19.32W i7-5650U 0.610A 14.64W 0.900A 21.60W i7-5650U 0.530A...

  • Page 83: Appendix D : Raid Installation Guide

    D.3 To Install All Device Drivers of System System The instructions are as follows: 1. To install Chipset driver 2. To install VGA driver 3. To install ME driver (if available) 4. To install Network driver 5. To install Audio driver Appendix D ©Vecow ECS-4000 User Manual...
  • Page 84 D.4 To Install “Intel Rapid Storage Technology” Software You can get the software on driver CD. Also, you can find latest information and software directly from Intel website. http://www.intel.com/p/en_US/support/highlights/chpsts/imsm The RAID environment has been done if you completed the steps above. D.5 To Insert SATA HDD for RAID 1 Please notice, you can use seven SATA ports for SATA storage devices.
  • Page 85 Then add “Logical Device” for Windows access. D.8 If One SATA HDD on RAID Volume is Out-of-use After RAID 1 volume created, you can see the figure of SATA device allocation. HDD CAUTION Sign Appendix D ©Vecow ECS-4000 User Manual...
  • Page 86 D.9 Recovery and Auto Re-build When Use the SAME RAID HDD D.10 Recovery and Auto Re-build When Use DIFFERENT RAID HDD There is a warning will pop-up to ask you if the disk is not a member of original RAID volume. If you press “Rebuild”, it will replace the broken SATA HDD to the last one SATA HDD of RAID volume.
  • Page 87 For further support information, please visit www.vecow.com This document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, or recording, without prior authorization from the publisher.

This manual is also suitable for:

Ecs-4000- poer650uEcs-4000- poer350uEcs-4000- poe650uEcs-4000- poe350uEcs-4000- 2g650uEcs-4000- 2g350u ... Show all

Table of Contents