Advertisement

Quick Links

EPBC-1000
Intel Atom
®
x6211E Processor (Elkhart Lake) 2.5" Pico-ITX Single Board
Computer 2 GigE LAN, 2 USB, 2 COM, 12V DC-in
USER
USER
Manual
Manual
1.4.0 Edition 20230530

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EPBC-1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vecom EPBC-1000

  • Page 1 USER USER EPBC-1000 Manual Manual Intel Atom ® x6211E Processor (Elkhart Lake) 2.5” Pico-ITX Single Board Computer 2 GigE LAN, 2 USB, 2 COM, 12V DC-in 1.4.0 Edition 20230530...
  • Page 2 Record of Revision Version Date Page Description Remark 1.00 2022/05/20 Official Release 1.10 2022/10/04 64, 65, 66 Update 1.20 2022/11/30 7, 8 Update 1.30 2023/04/26 3, 36, 37 Update 1.40 2023/05/30 7, 49 Update ©Vecow EPBC-1000 User Manual...
  • Page 3 Vecow Co., Ltd. The rights of all the brand names, product names, and trademarks belong to their respective owners. ©Vecow EPBC-1000 User Manual...
  • Page 4 Order Information Part Number Description ® EPBC-1000 2.5” Pico-ITX Single Board Computer, onboard Intel ® Atom x6211E Processor (Elkhart Lake), DDR4 SO-DIMM, 2 GigE EPBC-1000 LAN, 2 USB3.0, 1 COM RS-232/422/485, 1 COM RS-232, 12V DC-in Order Accessories Part Number...
  • Page 5: Table Of Contents

    1.4.2 Dimensions of Heat Spreader 1.4.3 Dimensions of Heat sink 1.4.4 Dimensions of MB+Heat Spreader 1.4.5 Dimensions of MB+Heat Sink CHAPTER 2 GETTING TO KNOW YOUR EPBC-1000 2.1 Packing List 2.2 Main Board Expansion Connectors 2.3 Main Board Jumper Settings CHAPTER 3 SETUP 3.1 Installing Heat Sink...
  • Page 6 APPENDIX A : GPIO Guide APPENDIX B : Software Functions APPENDIX C : Power Consumption APPENDIX D : Supported Memory & Storage List APPENDIX E : Driver install (Unknown Device ) APPENDIX F : Install Win11 (BIOS TPM Setting) ©Vecow EPBC-1000 User Manual...
  • Page 7: Chapter 1 General Introduction

    TDP 6W. With a variety of functionalities in a small form factor (measuring only 100mm x 72mm), the EPBC-1000 includes 2 GigE LAN, 2 USB, 2 COM, 1 DisplayPort, and 1 SIM card socket for 5G/ WiFi/4G/LTE/GPRS/UMTS.
  • Page 8: Features

    • 1 DDR4 3200MHz SO-DIMM, up to 32GB • DisplayPort supports up to 4K resolution • 2 GigE LAN, 2 USB 3.0, 2 COM • SIM Socket for 5G/WiFi/4G/LTE/GPRS/UMTS • Expansion : M.2 Key B, M.2 Key E ©Vecow EPBC-1000 User Manual GENERAL INTRODUCTION...
  • Page 9: Product Specification

    1.3 Product Specification 1.3.1 Specifications of EPBC-1000 System ® Processor Intel Atom x6211E Processor (Elkhart Lake) BIOS IT8659E Memory 1 DDR4 3200MHz SO-DIMM, up to 32GB Windows 10, Linux Graphics ® ® Processor Intel UHD Graphics for 10th Gen Intel...
  • Page 10 100.0mm x 72.0mm (9.34" x 2.83") Environment Operating -40°C to 70°C (-40°F to 158°F) Temperature Storage Temperature -40°C to 85°C (-40°F to 185°F) Humidity 5% to 95% humidity, non-condensing Relative Humidity 95% at 75°C CE, FCC ©Vecow EPBC-1000 User Manual GENERAL INTRODUCTION...
  • Page 11: Mechanical Dimension

    1.4 Mechanical Dimension 1.4.1 Dimensions of EPBC-1000 Unit: mm(inch) 100.0 3.94 3.0 0.12 94.5 3.72 3.0 0.12 94.0 3.70 Unit : mm (inch) 1.4.2 Dimensions of Heat Spreader Unit: mm(inch) 115.5 4.55 8.3 0.32 Unit : mm (inch) 1.4.3 Dimensions of Heat sink Unit: mm(inch) 126.0...
  • Page 12: Dimensions Of Mb+Heat Spreader

    1.4.4 Dimensions of MB+Heat Spreader Unit: mm(inch) 115.5 4.55 8.3 0.32 Unit : mm (inch) 1.4.5 Dimensions of MB+Heat Sink Unit: mm(inch) 126.0 4.96 8.3 0.32 Unit : mm (inch) ©Vecow EPBC-1000 User Manual GENERAL INTRODUCTION...
  • Page 13: Chapter 2 Getting To Know Your Epbc-1000

    GETTING TO KNOW YOUR EPBC-1000 2.1 Packing List Item Description EPBC-1000 2.5 Embedded Single Board Computer Item Description Picture Use for PHILLPIS 53-2426204-80B M3*4L SATA Power 61-1470022-005 Cble Audio Cable 61-1300024-39A SATA Data 61-13B0707-386 Cable COM Cable 61-13Q1009-0DA ©Vecow EPBC-1000 User Manual...
  • Page 14 Item Description Picture Use for USB Cable 61-193102U-156 M.2 Tray 62-03P0997-30A ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 15: Main Board Expansion Connectors

    2.2 Main Board Expansion Connectors 2.2.1 EPBC-1000 Main Board Top Side View JReset JRESET ESD1 LAN2 LAN1 LAN2 LAN1 P_V12A1 R1270 R623 FUSE1 R1269 M167 R1170 C1682 C245 C243 C247 GPO1 GPO2 R101 R1271 P_AUX1 R100 R103 R102 R104 R105...
  • Page 16 P_S2 R576 C428 FB29 There is a audio line out connectors, line-out, in the bottom side of EPBC-1000. Onboard Realtek ALC888S-VD audio codec supports 7.1 channel HD audio and ® fully complies with Intel High Definition Audio (Azalia) specifications. To utilize the audio function in Windows platform, you need to install corresponding drivers for both Intel Elkhart Lake and Realtek ALC888SVD codec.
  • Page 17 C136 C137 C138 R213 R215 C141 R221 C132 R222 C142 R220 R226 C145 R227 R228 R234 The EPBC-1000 series main board provides two expansion USB ports. The R238 P_VR_READY1 R245 C148 R246 R247 R248 C150 R249 C151 R255 R256 R257 C157...
  • Page 18 M2E_CN1 are listed in the following table : Pin No. Signal Name Pin No. Signal Name 3.3V 3.3V ALERT# (O)(0/3.3V) 12C_CLK (I)(0/3.3V) 12C_DATA (I/O)(0/3.3V) PEWAKE0# (I/O)(0/3.3V) PERST0# (I)(0/3.3V) CLKREQ0# (I/O)(0/3.3V) REFCLKn0 REFCLKp0 ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 19 PERn0 PERp0 PETn0 PETp0 Module Key Module Key Module Key Module Key Module Key Module Key Module Key Module Key LED2# (O)(od) LED1# (O)(od) 3.3V USB_D- 3.3V USB_D+ ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 20 C200 R342 R343 C203 SATA1 R348 R349 R350 C204 C207 C208 C209 R351 C210 HDD_PWR_J1 CONFIG_1 JSTATUS JHDD R352 R353 R354 C211 SIM DETECT PEWAKE# REFCLKp CLKREQ# REFCLKn PERST# PETp0/SATA-A+ PETn0/SATA-A- ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 21 UIM-PWR PETp1/USB3.1-TX+ UIM-DATA PETp1/USB3.1-TX- UIM-CLK UIM-RESET PETp1/USB3.1-RX+ PETp1/USB3.1-RX- Module Key Module Key Module Key Module Key Module Key Module Key Module Key Module Key LED_1# W_DISABLE1 USB- FULL_CARD_PWR_OFF/ON USB+ 3.3V 3.3V ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 22 R352 R353 R354 C211 RS-422 RS-485 Serial Port RS-232 Number (5-wire) (3-wire) TXD- DATA- TXD+ DATA+ RXD+ -------- RXD- -------- (RS232 only) -------- -------- (Full) -------- -------- -------- -------- -------- -------- ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 23 P_SYSPWROK1 C1678 There are 2 USB 3.2 Gen1 connections available supporting up to 5GB per M2B_MH1 CT10 CT11 R128 second data rate in the top side of EPBC-1000 series. They are also compliant R134 CT12 C1663 R138 R139 R140 R141...
  • Page 24 Green/ Solid Right Orange Green Twinkling Twinkling Left Orange Orange Orange 2.2.12 DP1 : Display port EPBC-1000 support a Display Ports and up to 4096 x 2304 pixels resolution JRESET ESD1 LAN2 LAN1 P_V12A1 R1270 R623 FUSE1 R1269 M167 R1170...
  • Page 25 R353 R354 C211 There is a high performance Serial ATA III (SATA III) on the EPBC-1000 series. They support higher storage capacity with less cabling effort and smaller required space. The JRESET pin assignments of SATA1 listed in the following table :...
  • Page 26 C1682 C245 C243 C247 GPO1 GPO2 R101 The power button is a non-latched switch. To power on EPBC-1000, press the power R1271 button. P_AUX1 To power off EPBC-1000, you can either command shutdown by OS operation or R100 R103 R102...
  • Page 27 R542 R543 C405 C406 C407 R544 R545 C410 R546 C409 P_SM1 R563 P_VPP1 R565 R566 C421 R567 C422 R568 R569 DIMM1 C423 C424 R570 C426 R575 C427 P_S2 R576 C428 FB29 ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 28 These pin header can be used as a backup for following functions, hard drive LED indicator, reset button, power LED indicator, The pin assignments are listed in the following table : Pin No. Pin No. Definition FP_PWR_BTN_IN JRESET PWR_LED_P JSTATUS PWR_LED_N HDD_LED_P JHDD HDD_LED_N ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 29 2.2.22 J80p1 : I2C/SMB header Pin No. Definition +3.3V SMBUS_DAT SMBUS_CLK I2C_DAT I2C_CLK ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 30: Main Board Jumper Settings

    2.3 Main Board Jumper Settings 2.3.1 Top View of EPBC-1000 Main Board with Jumper Location The figure below is the top view of the EPBC-1000 main board. It shows the location of the jumpers. JRESET ESD1 LAN2 LAN1 P_V12A1 R1270...
  • Page 31 R336 FB5 C190 R337 R338 R339 R334 C191 C193 C198 C199 C200 R342 R343 C203 SATA1 R348 R349 R350 C204 C207 C208 C209 R351 C210 HDD_PWR_J1 JSTATUS JHDD R352 R353 R354 C211 ©Vecow EPBC-1000 User Manual GETTING TO KNOW YOUR EPBC-1000...
  • Page 32: Chapter 3 Setup

    SETUP 3.1 Installing Heat Sink Step 1 Fasten four PH-M3x4 screws indicated. ©Vecow EPBC-1000 User Manual SETUP...
  • Page 33: Installing Ddr4 So-Dimm Modules

    3.2 Installing DDR4 SO-DIMM Modules Step 1 Remove the Screws indicated and separate the heat-sink from the PCB. Step 2 Finished. ©Vecow EPBC-1000 User Manual SETUP...
  • Page 34: Installing Sim Card

    3.3 Installing SIM Card Step 1 Install SIM card into the SIM card slot. 3.4 Installing M.2 3.4.1 Key E 2230 Step 1 Install M.2 into the M.2 slot and fasten M3 screw indicated. ©Vecow EPBC-1000 User Manual SETUP...
  • Page 35 Step 1 Install M.2 with M.2 Tray into the M.2 slot and fasten M3 screw indicated. 3.4.4 Key B 3052 Step 1 Install M.2 with M.2 Tray into the M.2 slot and fasten M3 screw indicated. ©Vecow EPBC-1000 User Manual SETUP...
  • Page 36 Figure 4-1 : Entering Setup Screen BIOS provides an interface for users to check and change system configuration. The BIOS setup program is accessed by pressing the <Del> key when POST display output is shown. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 37 System Date Set the date. Use Tab to switch between date elements. System Time Set the time. Use Tab to switch between time elements. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 38 4.3 Advanced Functions Figure 4-3 : BIOS Advanced menu Select advanced tab to enter advanced BIOS setup options such as CPU configuration, USB configuration, and Network Stack configuration. 4.3.1 CPU Configuration Figure 4-3-1 : CPU Configuration ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 39 Figure 4-3-2-1 : CPU - Power Management Control Boot performance mode Select the performance state that the BIOS will set starting from reset vector. Intel(R) SpeedStep(tm) Allows more than two frequency ranges to be supported. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 40 Disable Turbo GT frequency Enabled: Disables Turbo GT frequency. Disabled: GT frequency is not limited. 4.3.3 PCH-FW Configuration Figure 4-3-3 : PCH-FW Configuration ME State CWhen Disabled ME will be put into ME Temporarily Disabled Mode. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 41 Gfx LLC allocation to minimize impact of Gfx workload on LLC. 4.3.5 Trusted Computing Figure 4-3-5 : Trusted Computing Control the TPM device status and display related information if TPM chip is present. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 42 4.3.8 IT8659E Super IO Configuration Figure 4-3-8 : IT8659E Super IO Configuration Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB). ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 43 Both computers should have the same or compatible settings. 4.3.11 Acoustic Management Configuration Figure 4-3-11 : Acoustic Management Configuration Acoustic Management Configuration Option to Enable or Disable Automatic Acoustic Management. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 44 DISABLE option will keep USB devices available only for EFI applications. XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 45 Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys to set the value. Media detect count Number of times the presence of media will be checked. Use either +/- or numeric keys to set the value. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 46 4.4.1 System Agent (SA) Configuration Figure 4-4-1 : System Agent (SA) Configuration VT-d VT-d capability. Above 4GB MMIO BIOS assignment Enable/Disable above 4GB MemoryMappedIO BIOS assignment. This is enabled automatically when Aperture Size is set to 2048MB. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 47 Enabling Error Injection allows attackers who have access to the Host Operating System to inject IBECC errors that can cause unintended memory corruption and enable the leak of security data in the BIOS stolen memory regions. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 48 Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. DVMT Total Gfx Mem Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device. PM Support Enable/Disable PM Support. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 49 2 - ~ Power Management Events 3 - PCIe Advanced Error Reporting control 4 - PCIe Capability Structure control 5 - Latency Tolerance Reporting control PCI Express device settings BIOS options for PCI Express device setting. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 50 Otherwise all drives spin up at boot. SATA Device Type Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 51 Force unlock on all GPIO pads If Enabled BIOS will force all GPIO pads to be in unlocked state. 4.5 Security Function Figure 4-5 : BIOS Security Menu Administrator Password Set Administrator Password. User Password Set User Password. ©Vecow EPBC-1000 User Manual BIOS SETUP...
  • Page 52 Secure Boot mode options: Standard or Custom. In Custom mode, Secure Boot Policy variables can be configured by a physically present user without full authentication. Key Management Enables expert users to modify Secure Boot Policy variables without full authentication. ©Vecow EPBC-1000 User Manual Appendix 3...
  • Page 53 Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State Select the keyboard NumLock state. Quiet Boot Enables or disables Quiet Boot option. Boot Option #x Sets the system boot order. ©Vecow EPBC-1000 User Manual Appendix 3...
  • Page 54 Restore Defaults Restore/Load Default values for all the setup options. Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. ©Vecow EPBC-1000 User Manual Appendix 3...
  • Page 55 APPENDIX A : GPIO Guide A.1 Function Description The EPBC-1000 offers a 8-bit GPIO a pair of 10-bit internal connector, and a JRESET ESD1 LAN2 LAN1 watchdog timer. GPIO definition is shown below: P_V12A1 R1270 R623 FUSE1 R1269 M167 R1170...
  • Page 56 Sample folders include sample program, driver library, and API library for Windows/Linux Source folders include sample program source code that compile on Visual Studio 2008/ ubuntu18.04. A.3 Sample Execute demo tool. Windows Linux Vecow_DIO Vecow_DIO_loopback ©Vecow EPBC-1000 User Manual Appendix A...
  • Page 57 Vecow_WDT ©Vecow EPBC-1000 User Manual Appendix A...
  • Page 58 Mask ([15:0]): In / Out, pin setting by hexadecimal bitmask only for Non- Isolated DIO(GPIO). 1: Output; 0: Input Return : TRUE (1): Success. FALSE (0): Fail (Initial error, or call by pointer error, or hardware problem). ©Vecow EPBC-1000 User Manual Appendix B...
  • Page 59 WDT: watchdog timer setup Unit: second. (Range: 0 ~ 65535 sec, 1093 ~ 65535 min (=65580 ~ 3932100 sec)) Return: TRUE (1): Success; FALSE (0): Fail (Initial error, or call by pointer error, or hardware problem) ©Vecow EPBC-1000 User Manual Appendix B...
  • Page 60 0: RS232 mode; 1: RS422-5Wire mode. 2: RS422-9Wire mode; 4: RS485 mode. 4: Loopback mode. G.term: Termination enable for RS422/RS485 mode. 1: Enable; 0: Disable. Return: TRUE (1): Success; FALSE (0): Fail (Initial error or hardware problem) ©Vecow EPBC-1000 User Manual Appendix B...
  • Page 61 USB Mouse HP G1K28AA SATA 0 Apacer SATA AP120GAS340XC SATA 1 Kingston SA400MB/480GB LAN 1 (RTL8119I) 1.0 Gbps LAN 2 (RTL8119I) 1.0 Gbps Graphics Output Power Plan Balance (Windows10 Power plan) Power Source Chroma 62006P-100-25 ©Vecow EPBC-1000 User Manual Appendix C...
  • Page 62 Power on and boot to Win10 64bit Run 100% CPU Run 100% CPU Power usage without 2D usage with 3D Input Current Consumption Current Consumption ® Intel Atom 0.889A 10.67W 0.940A 11.28W x6211E ©Vecow EPBC-1000 User Manual Appendix C...
  • Page 63 Test Temp. Brand Info (Celsius) innodisk 16G DDR4-2400 SO-DIMM M4D0-AGS1Q5SJ-H03 25ºC innodisk 4G DDR4-2666 SO-DIMM M4S0-4GSSNCIK-H03 25ºC MemxPro 16G DDR4-2666 SO-DIMM D4S-AG26H1G8W2 25ºC SL-Link 32GB DDR4-3200 SODIMM J4BGSH2G8TMFC 25ºC Smart 16GB DDR4-3200 SODIMM ST2046SO410825-SE 25ºC ©Vecow EPBC-1000 User Manual Appendix D...
  • Page 64 SATA SSD Intel SSD E 5400s SSDSC2KR120H6 120GB MEMXPRO M3A MI3MA1212802WN 128GB FORESEE S903S128G 128GB FORESEE S903S256G 256GB LITE-ON K8-L1256 256GB LITE-ON K8-L1512 512GB ** If more help is needed, please contact Vecow Technical Support.** ©Vecow EPBC-1000 User Manual Appendix D...
  • Page 65 APPENDIX E : Driver install (Unknown Device ) Right-click file, select Extract All… Click Extract ©Vecow EPBC-1000 User Manual Appendix E...
  • Page 66 Right-click start select Device Manager Right-click Unknown device select Update driver ©Vecow EPBC-1000 User Manual Appendix E...
  • Page 67 Select Browse my computer for drivers Click Browse ©Vecow EPBC-1000 User Manual Appendix E...
  • Page 68 Select decompressed file Click OK Click Next ©Vecow EPBC-1000 User Manual Appendix E...
  • Page 69 Update Unknown Driver successfully ©Vecow EPBC-1000 User Manual Appendix E...
  • Page 70 APPENDIX F : Install Win11 (BIOS TPM Setting) Step 1 Click on “Advanced”, then click on “PCH-FW Configuration” Step 2 Click on “PTT Configuration” ©Vecow EPBC-1000 User Manual Appendix F...
  • Page 71 Step 3 Click on “dTPM” (TPM Device Selection) Step 4 Please save the BIOS settings by pressing F4. Please press Enter when the pop-up window which asks “Save configuration and exit?” appears. The computer will then restart. ©Vecow EPBC-1000 User Manual Appendix F...
  • Page 72 Step 5 Click on “Trusted Computing” Step 6 If the window shows “TPM2.0 Device Found Firmware Version:5.62”, then the setting is completed. ** If more help is needed, please contact Vecow technical support ** ©Vecow EPBC-1000 User Manual Appendix F...
  • Page 73 For further support information, please visit www.vecow.com This document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, or recording, without prior authorization from the publisher.

Table of Contents