Summary of Contents for Retractable Awnings Balance Support
Page 1
Balance Support Use and maintenance / assembly manual All information contained in this document was provided by the European manufacturer/ designer of the components for this particular model. As a fabricator/distributor, Retractableawnings.com® Inc. claims no liability with respect to these documents as we are not engineers and did not complete any of the information, engineering or calculations in this document.
Page 3
Balance Support Use and maintenance / assembly manual 1 Assembly / disassembly and belt replacing ..............5 Balance Support assembly on square bar .............. 5 Disassembly and belt replacing ................6 New belt assembly ....................7 21/09/2020 Rev.02...
Page 4
The information in this document is only applicable to the Palermo, Palermo Plus and Roma models. It is not applicable to the Venezia model.
Page 5
To replace the belt see manual assembly / installation of the awning. It is recommended to assemble the balance support in line with the reinforcement strip (if present). The width of the reinforcement strip must be greater than that of the balance support.
Page 6
Balance Support Use and maintenance / assembly manual 0° Pic. 3 1.2 Disassembly and belt replacing 4° 3° 2° 2° 1° 1° Pic. 4 A) Safety rope Pic. 5 21/09/2020 Rev.02...
Page 7
Balance Support Use and maintenance / assembly manual 1.3 New belt assembly Pic. 6 3° 4° 1° 1° 2° 2° Pic. 7 21/09/2020 Rev.02...
Need help?
Do you have a question about the Balance Support and is the answer not in the manual?
Questions and answers