Page 10
RCR-2CENR RADIO SYSTEM ESC GUIDE Specs: Model: WP-MAX10-SCT-120A-4S-RTR Cont./Peak Current: 120A/830A LIPO/NiMH Cells: 6-12 Cells NiMH, 2-4S LiPo Applications: Land Vehicles Only Built in BEC: 6V/7.4V Switchable, 4A (Switch-mode) Size / Weight: 49 x 39.5 x 34.7mm (W/Fan) / 105g Programming Port: FAN / PRG Port Motor Type:...
Page 11
RCR-2CENR RADIO SYSTEM Battery Calibration 1. Turn on the transmitter, set parameters on the throttle channel like Press and hold the Turn ON the ESC “D/R”, “EPA” and “ATL” to 100% and the throttle “TRIM” to “0”. Disable Release the SET button the “ABS braking function”.
RCR-2CENR RADIO SYSTEM Programming (Continued) 5. The Red LED will flash the number of times that corresponds to the number of the Press and release Turn off The Red LED option listed along the top of the chart. (1 flash = Option 1, 2 flashes = Option 2, etc.) the SET button the ESC.
Page 13
RCR-2CENR RADIO SYSTEM Programming (Continued) In the program process, the motor will emit a “Beep” tone when the LED flashes. A long flash and long “Beep---” tone is used to represent the number “5”, to easily identify items of a large number. “A long flash”...
Page 14
RCR-2CENR RADIO SYSTEM Programmable Items Description (Continued) 5. Motor Thermal Protection: This feature is permanently set to “Disabled” and is not applicable. 6. Motor Rotation: With the motor shaft facing you, applying throttle will cause the motor to spin clockwise if set to CW. If set to CCW, the motor will spin counter clockwise.
Page 15
ON/OFF switch was turned ON. ESC. soldered and firmly connected. 2. The ESC switch may be damaged. 2. Contact Redcat support. The vehicle ran backward when you pulled 1. The radio “Throttle Reverse” switch 1. Switch the radio “Throttle Reverse”...
Need help?
Do you have a question about the Valkyrie TR 4S and is the answer not in the manual?
Questions and answers