Advertisement
Advertisement
Table of Contents
Related Manuals for Nitho NEXUS MLT-NEXS-W
Summary of Contents for Nitho NEXUS MLT-NEXS-W
- Page 1 NEXUS WIRELESS CONTROLLER QUICK START GUIDE Model: MLT-NEXS-W...
-
Page 2: Specifications
SPECIFICATIONS THANK YOU FOR BUYING NITHO NEXUS WE WOULD LIKE TO INTRODUCE ITS SPECIFICATIONS: A. Full compatibility with Switch®, PC, iOS® and Android®. B. It’s equipped with the latest motion sensor technology. C. The built-in six-axis gyroscope and six-axis accelerator can detect an omnidirectional dynamic information including Roll, Pitch and Yaw. - Page 3 FEATURES BUTTONS LIST T(Turbo), HOME, A, B, X, Y, L, ZL, R, ZR, L3, R3, ^, v, <,>, Screenshot, Select COMPATIBILITY Supports Switch® console, Android®, iOS®(above 13.0) and PC(Windows® 10 and above) D-Input protocol if wireless and D-Input + X-Input protocols if wired. CONNECTION NEXUS keeps connected up to 6 metres away from the main device.
-
Page 4: Wired Connection Setup
NOTE BEFORE USING NEXUS Before connecting NEXUS controller for the first time, fully charge the battery. To recharge the battery, plug the supplied USB cable into the controller and a USB port. In controller shutdown state, the LED1-LED4 mode indicator blinks slowly while charging, and turns off when charging is complete. -
Page 5: Wireless Connection Setup
WIRELESS CONNECTION SETUP CONSOLE 1.Turn on Bluetooth function 1). Enable Bluetooth on Switch® Console. 2). Turn on the Switch® console and go to the “System Settings” Menu, then click “Airplane Mode” option 3). Select “Controller Connection (Bluetooth)” option to turn on Bluetooth function. - Page 6 PC, IOS® & ANDROID® On standard Android® Mode Press “A” + “HOME” button to paring mode, LED2+LED3 is flashing quickly Click “GamePad” devices name on your Android device to pair, LED2+LED3 light will stop to blink after successfully pairing. On Bluetooth IOS®/PC and Android® Mode Press “X”...
- Page 7 SWITCH SIX-AXIS CALIBRATION SETUP ® If the axis sensor is not calibrated, you can use any of the following instructions to recalibrate it.
- Page 8 RGB LIGHT EFFECT SETUP You can long press the “LIGHT” button at the back of the controller to switch or turn off the RGB light effect. Press the “LIGHT” + “R3” button to switch four light effect modes: Dazzling Light Mode Press “LIGHT”...
- Page 9 VIBRATION INTENSITY ADJUSTMENT 3D JOYSTICK CALIBRATION SETUP...
-
Page 10: Button Test
BUTTON TEST If controller buttons fail or do not respond, use the console's button test option to check button functionality: Go on “System Setting”>”Controllers and Sensors”>”Test Input Devices”>”Test Controller Button” Then the symbol for the button you press will appear on the screen RESET FUNCTION To reset the Controller press the Reset button at the bottom of... - Page 11 PRECAUTIONS Do not use NEXUS controller for purpose other than those outlined in this Quick Star Guide. Store and use the controller in a dry area, protected from moisture and direct sunlight. Elevated temperatures can damage the controller. Do not disassemble the controller. Stop playing with the controller, if you are uncomfortable or tired.
-
Page 12: Fcc Statement
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. - Page 13 SERVICE & SUPPORT If you have any questions or require support, contact NITHO Team at support@nitho.com or visit our website www.nitho.com NiTHO GmbH - Victoriastrasse 3b - 86150 Augsburg - Germany SUPPORT@NITHO.COM WWW.NITHO.COM NITHOGAMES NITHOGAMES...
Need help?
Do you have a question about the NEXUS MLT-NEXS-W and is the answer not in the manual?
Questions and answers