Do you have a question about the XP-80 and is the answer not in the manual?
Questions and answers
박국찬
January 19, 2025
ROLAND XP-80 LCD 밝기 조절 어떡게 하나요?
1 comments:
Mr. Anderson
May 14, 2025
To adjust the LCD brightness on the Roland XP-80, you can use an external control method. Connect a 100k potentiometer with one end to -5V, the other end to +5V, and the center (wiper) to pin 4 of the LCD. Disconnect pin 4 from the motherboard before doing this. Adjust the potentiometer to change the contrast. If the LCD does not respond, it may need to be replaced.
Need help?
Do you have a question about the XP-80 and is the answer not in the manual?
Questions and answers
ROLAND XP-80 LCD 밝기 조절 어떡게 하나요?
To adjust the LCD brightness on the Roland XP-80, you can use an external control method. Connect a 100k potentiometer with one end to -5V, the other end to +5V, and the center (wiper) to pin 4 of the LCD. Disconnect pin 4 from the motherboard before doing this. Adjust the potentiometer to change the contrast. If the LCD does not respond, it may need to be replaced.
This answer is automatically generated