Download Print this page

Marksman 67074c Instruction Manual

110w polishing machine

Advertisement

Quick Links

INSTRUCTION MANUAL
67074c
Read all the instruction carefully before you use
the appliance and keep it for future use.
110w Polishing Machine
• 230V~50Hz
• 110w
• 2900RPM
• 245MM disc
3 AMP fuse (max)
must be fitted to plug
attached to this cable.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 67074c and is the answer not in the manual?

Questions and answers

Summary of Contents for Marksman 67074c

  • Page 1 INSTRUCTION MANUAL 67074c Read all the instruction carefully before you use the appliance and keep it for future use. 110w Polishing Machine • 230V~50Hz • 110w • 2900RPM • 245MM disc 3 AMP fuse (max) must be fitted to plug...
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS Please read these operating instructions before using the tool for the first time and keep them with the tool at all times. Technical Data 67074c Voltage 230v~50Hz Power Rating 110w Speed 3100rpm Polishing Pad 240mm Dia Sound Pressure Level at the Workplace LPA...
  • Page 3 • Do not exert too much pressure when polishing but simply allow the polishing machine to glide over the polishing surface. • Check the housing and switch for damage. • Do not use the polishing machine, if the housing or switch Is defective. •...
  • Page 4 Work next on the smaller surfaces Switch the polishing machine on and (doors, for example). allow the mains off only when the polishing machine is cable to hang from the appliance resting on the polishing surface. and hold the polishing machine as illustrated.
  • Page 5: Safety Instructions

    SAFETY INSTRUCTIONS Warning! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before attempting to operate this product and save these instructions. For safe operation: 01.
  • Page 6 - A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by an authorised service centre. Do not use tool if switch does not turn it on and off.
  • Page 7 UK plUg REwIRINg Your appliance operates on 230-240V-50Hz AC Mains and comes fitted with a 3-pin BSI Approved plug, so that it is ready for use by simply plugging into AC Mains. Should you need to change or refit a plug, proceed as follows: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:...
  • Page 8: Correct Disposal Of This Product

    To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. 110w Polishing Machine 67074c...