Table of Contents
Related Manuals for Marksman 67097c
Summary of Contents for Marksman 67097c
- Page 1 INSTRUCTION MANUAL 67097c Read all the instruction carefully before you use the appliance and keep it for future use. 135w Sander 90x187mm 230V~50Hz 135w - 11000rPm 3 amP fuse (max) must be fitted to plug attached to this cable.
- Page 2 FIG A. 1 On/off switch FIG C. 2 Lock button 3 Dust extraction connection 4 Paper clamps 5 Sanding pad FIG B. Technical Data 67097c Voltage/Frequency: 230V- 50Hz Input power: 135w No-load speed: 11000/min Orbits 23000/min Sanding Surface 90 x 187 The following symbols are used throughout this manual: Denotes risk of personal injury or damage to the tool.
- Page 3 ELECTRICAL SAFETY Always check that the power supply corresponds to the voltage on the rating plate. Your finishing sander has been designed for sanding applications. FITTING SANDING ShEETS (FIG. A) • Open the paper clamps (4). • Take sanding paper of the required grain size and place it on the sanding pad (5). Make sure that the perforation in the paper correspond with those on the sanding pad.
- Page 4 • Make sure that there is enough light! Make sure that the working area is visible at a glance! • Do not use electric tools in areas subject to the risk of fires! Protect yourself against electric shocks. • Avoid coming into contact with earth parts (e.g. pipes, radiators. stoves, refrigerators). •...
- Page 5 • Check the tool for damages. • Before using the tool the next time check that the protection devices or slightly damaged parts are in good working conditions! Check whether the moving parts function correctly, that these are not jammed or whether any parts are damaged. •...
- Page 6 SAFETY INSTRUCTIONS warning! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before attempting to operate this product and save these instructions. For safe operation: 01.
- Page 7 parts, mounting, and any other conditions that may affect its operation. - A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by an authorised service centre. Do not use tool if switch does not turn it on and off.
- Page 8 UK plUg REwIRINg Your appliance operates on 230-240V-50Hz AC Mains and comes fitted with a 3-pin BSI Approved plug, so that it is ready for use by simply plugging into AC Mains. Should you need to change or refit a plug, proceed as follows: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:...
Need help?
Do you have a question about the 67097c and is the answer not in the manual?
Questions and answers