Sharper Image 210469 User Manual

Thank you for purchasing the Windproof Torch Lighter. Please read this manual thoroughly
before operating this device.
INSTRUCTIONS FOR USE
Inflation
• Shake the gas bottle gently and evenly distribute the gas inside the cylinder. T
• Then, invert the lighter, align the outlet of the gas tank with the gas injection port of the lighter,
press moderately, and inflate vertically.
• If you notice gas overflow, it indicates that the lighter is full. Typically, it takes only 2-3 seconds
to fill.
Using Gas Specifically for Lighters
Using poor-quality gas may damage the lighter's performance or render it unusable. Always use
gas specifically designed for lighters.
Precautions for Refueling
• Refill gas in a well-ventilated area away from open flames. Use only authentic butane gas
pressurized between 3.6 to 4.2 atmospheres.
• Before refueling, adjust the gas regulating wheel towards the (-) direction.
Flame Adjustment
• Use a suitable screwdriver to rotate the adjusting rod at the bottom of the lighter to modify
the flame height. Rotate towards the (+) direction to increase the flame; rotate towards the (-)
direction to decrease it.
• Adjust the flame to an appropriate height: 1.5-2.0 cm for a windproof lighter, 2.0-2.5 cm for a
direct flame lighter, 2.5-3.0 cm for an open flame lighter, and 3.0 cm for a spray gun flame.
Safety Notices
• Keep the lighter away from your face, clothing, and others while in use.
• Store the lighter properly and avoid prolonged exposure to direct sunlight or temperatures
above 45°C.
• Do not strike or place the lighter in a fire. Always ensure the lighter is off after use.
WINDPROOF TORCH LIGHTER
Item No. 210469
User Guide
- 1 -