Download Print this page

Advertisement

Quick Links

Bruksanvisning
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 871 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Limente 871 Series

  • Page 1 Bruksanvisning...
  • Page 2 1. kansi/lock/lid 2. laiterunko/enhetsbas/device carrier 3. kotelo/chassi/housing...
  • Page 3 Käyttöohjeet Jotta lattiapistorasian pitkäikäinen toiminta • Virheettömän toiminnan varmistamiseksi tiivisteet on voidaan varmistaa, on noudatettava seuraavia puhdistettava säännöllisesti liasta ja niiden kunto on ohjeita: tarkistettava. • Kytkentä, korjaus tai huolto on suoritettava • Määritelty suojausluokka voidaan taata vain, jos koulutetun asiantuntijan toimesta. Asennuksen ja lattiapistorasia on täydellisessä...
  • Page 4 Bruksanvisning För att säkerställa en långvarig funktion av • För att säkerställa felfri drift måste tätningarna golvuttaget måste följande instruktioner följas: regelbundet rengöras från smuts och kontrolleras för perfekt skick. • Anslutning, reparation eller underhåll måste utföras • Den specificerade kapslingsklassen kan endast garanteras av en utbildad specialist.
  • Page 5 Instruction Manual In order to ensure a lasting function of the • To ensure faultless operation, the seals must be floor socket, the following instructions must be regularly cleaned of dirt and checked for perfect observed: condition. • The specified degree of protection can only be •...
  • Page 6 Assembly Instructions Kokoamisohjeet Monteringsanvisningar Glued to the insulation layer (P) as a placeholder. Then lay the conduit (L) and fix it Remove the lid. Then remove the device (e. g. with adhesive tape) vertically to the poly- carrier from the box. / Poista kansi ja poista styrene block (PB).
  • Page 7 Asenna kotelo Installera chassi Insert the housing...
  • Page 8 Lattiamateriaali Floor material Golvmaterial...
  • Page 9 Tiivistä kotelo Täta chassi Seal the housing...
  • Page 10 After the mortar has hardened, Kun laasti on Efter att murbruket har connect the devices and screw the kovettunut, kytke stelnat, anslut enheterna device carrier back into the housing. laitteet ja aseta och placera enhetsbasen Lay the floor covering (B) and insert a laiterunko takaisin tillbaka i chassin.

This manual is also suitable for:

872 series