Page 1
Please read this user manual before operating and save for future reference. Please read this user manual before operating and save for future reference. Model: DE260...
Or contact our customer service with any questions,comments, or concerns , We are online 24H for you. Thank you for using ANDTE products in your home! Made in China...
Page 4
READ THIS MANUAL INSTRUCTION CAREFULLY BEFORE USING THE UNIT. PLEASE KEEP THIS FOR FUTURE REFERENCE. ANDTE DE260 commercial dehumidifier can remove 250 PPD at saturation (95°F, 90% RH) and 110 PPD at AHAM (80°F, 60% RH) for an area of up to 8,000 square feet, reducing humidity to comfortable levels in a short period of time.
Before using this product, please read the user manual carefully to ensure that this product functions at its best. The ANDTE's dehumidifier adopt an upgraded design, compact structure, easy to operate, and other characteristics, widely used in scientific research, basement, crawl space, greenery, laboratory, gymnasium, sanitation, commodity storage, underground engineering, and dehumidification in high humidity places such as kitchens, bathrooms, archives, warehouses, etc.
Important Safety Tips 1. When cleaning or storing the dehumidifier, please pull out the plug first, cut off the power supply, and ensure safety. 2.Don't immerse the machine in water or close to water sources. 3.Don't place the machine near heating devices or flammable dangerous goods.
Machine Structure Diagram Control panel Air inlet Caster Air outlet Wind out Drainage outlet Power cord box NOTE:There May be slight differences in the model, the actual machine shall prevail.
Operation Instruction Operation panel Timer light Defrosting light Power light TIMER DEFROST POWER TIMER DOWN POWER Timer key Up key Display window Down key Power key Key description: 1. Power switch key: In the shutdown state, press once to turn on the machine, otherwise turn off the machine.
Page 10
Action description: Startup: the fan is turned on, and the compressor 1 is turned on with a delay of several seconds. Shutdown: the compressor is stopped immediately, and the fan is stopped after a delay of several seconds. Without turning on the power supply, the compressor can be turned on again after it stops running for 3 minutes.
Page 11
1) When the ambient temperature is higher than the high temperature setting value (default 113℉ / 45℃), the system enters high temperature protection, prompts "HH", and the compressor stops running; 2) When the ambient temperature is lower than the low temperature setting value (default 39℉...
3)Put the dried filter back into the dehumidifier;If the dehumidifier fails, please follow the "Troubleshooting" in the manual before contacting ANDTE support. Do not repair or disassemble the dehumidifier by yourself. Improper maintenance may endanger the safety of users.
1. When the above fault cannot be eliminated and it is confirmed that repair is required, please contact the ANDTE support, please do not disassemble the machine for repair without authorization. 2. When the dehumidifier is running or stopped, it is normal to hear the sound of refrigerant circulating.
1. When using, do not place the 2. Do not use thin rods or hard 3. When using, please keep the objects to insert into the fuselage dehumidifier on soft, uneven dehumidifier away from heat ground to avoid vibration or to avoid malfunction or danger.
Service ANDTE offers a limited 1-year free warranty on this DE260 dehumidifier, with original proof of purchase (typically you maybe only requested to offer the order number or other information to prove a genuine purchase, instead of an invoice) and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period.
Need help?
Do you have a question about the DE260 and is the answer not in the manual?
Questions and answers