Synchronizing Data - Motorola T720 CDMA Manual

Serial Cable
Action
1 Plug the serial
cable into the
detachable head.
Make sure that the
Motorola logo on
the detachable
head and the metal shielding on the serial cable
plug are both facing you.
2 With the Motorola
logo and the phone
both facing you,
plug the
detachable head
into the phone's
accessory
connector port.
3 Plug the other end of the cable into the serial
interface connection on the device and tighten
the screws, if present.
USB Cable
Action
1 Plug the end of the
cable with the
Motorola logo into the
phone's accessory
connector port. Make
sure that the logo and
the phone are both
facing you.
2 Plug the other end—the USB connection—into
the USB port on the external device.

Synchronizing Data

You can synchronize phonebook and datebook information
between your phone, computer, and PDA with Starfish
®
TrueSync software, a Motorola accessory product. See
the TrueSync user guide for more information.
Note: TrueSync software is designed to synchronize with
basic features of many popular Personal Information
Management (PIM) software and hardware products.
18
Sending a Data or Fax Call
Use this procedure to send data or a fax from a connected
computer or hand-held device.
Action
1 Make sure that the phone is connected and
powered on
2 Open the application (such as
dial-up-networking or fax) on your computer, and
place the call through the application
Note: You cannot dial data or fax numbers
through your phone's keypad. You must dial
them through your computer.
3 When the transfer is complete, end the call from
the connected device to close the connection
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to a connected
computer or hand-held device.
Setting Up Your Phone
Find the Feature
Action
+
1 Press CHANGE ( ) to select Next Call
S
to scroll to Data In Only or Fax In Only
2 Press
+
3 Press SELECT (
) to set the call format
4 Connect your phone to the device to enable the
data or fax transfer
Note: You cannot answer incoming voice calls when your
phone is in data or fax mode. Any voice calls you receive
are treated as unanswered calls. To return a voice call,
reset your phone to normal voice operation as described
below.
Transferring the Data or Fax
Your phone notifies you when the data or fax call arrives,
and transfers the call to the connected device. Use the
application running on the device to answer the call.
Ending the Data/Fax Connection
When the data or fax transfer is complete, end the call
from the connected device to close the connection.
Resetting Normal Voice Operation
After making a data or fax call, you must reset your phone
to resume normal voice operation.
Find the Feature
Your phone also reverts to normal voice operation when
you turn it off and then turn it back on.
M
> Settings
> Connection
> Incoming Call
M
> Settings
> Connection
> Incoming Call
> Next Call > Normal