Editing Your Calendar - Motorola STARTAC CLIPON Manual

‹
View key to bring up a menu of options.
Icon

Editing your Calendar

You can create, modify, and delete Calendar events by
changing to Edit mode and using the Clip-On's Wizards.
To create a new event:
1 Press the Edit key in the Calendar module, or in the Home
screen.
2 Choose the new event type by highlighting it using the Up
or Down key, and then pressing the Select key.
3 The next Wizard screen will vary, based on the profile you
chose during the StarTAC Clip-On Setup. It will show a
pre-set QuickList of events.
Use the Up or Down key to choose from the list, and then
press the Select key.
4 Confirm the event's type and subject by pressing the Down
key.
5 Depending on your selections, you may now be asked to
select a participant. If you choose to select a participant
from your Contacts, use the Up or Down key to scroll
through the alphabetical tabs of a cardfile. You can use the
Select key, and then the Up or Down key, to go to a specific
lettered tab. Press the Select key, and then use the Up or
Down key, to go to the card for the participant whom you
want to add. Press the Select key to enter your choice.
20 Chapter 2
Select the
Event Type
from the list.