Advanced Storing - Motorola STARTAC - 1 Manual

Advanced Storing

Pause
If you often find yourself calling Voice Mail systems, banking
Dialing
by phone or using other automated calling systems, you will
appreciate the one-key convenience of Pause Dialing. Simply
save the access numbers as a linked sequence, and you'll
never need to enter them again!
Here's how it works: when you call automated systems, a
recorded message prompts you for PIN numbers, Voice Mail
numbers, etc. You can store these numbers in your phone's
memory, separated by "pauses"— special characters that tell
your phone to wait before sending additional numbers.
To use your stored sequence, simply recall it and press and
hold the smart button or press
When the recording prompts you for information, just
press the Smart Button or press
will send the next set of numbers that you stored. Press the
Smart Button or press
to transmit all the numbers.
1. Enter
number
2. Press
3. Press
Tip: You can use
the Smart Button
instead of
46
to place the call.
and your phone
as many times as necessary
Enter the phone number you use
to access the automated system.
You will see:
then press
to insert a pause into the
sequence.
Advanced Storing
4. Enter Enter the next group of numbers,
numbers for example, an account number
or PIN number. If the automated
system requires a
those symbols, too.
5. Insert pause Insert another pause and enter
the next group of numbers by
repeating steps 2 through 4 as
many times as necessary. You can
store up to 32 digits, including
pauses. When you've entered the
entire sequence, store it as you
would any phone number.
6. Press to begin storing.
7. Enter Enter the two-
location digit memory
location where
you want the sequence stored.
8. Enter name Enter a name for your sequence.
(See page 41 for details.)
9. Press when you are finished entering
the name. Your phone will confirm
your entry by displaying the loca-
tion, number and name you stored.
Pause
Dialing
or # , enter
*
47