Advertisement
Quick Links
drive.web
Universal Automation Controller
with XA Option
model
dw25x-xx-XAxx
Installation & Operation Manual
Contents
Design Statements, Warnings
XA Product Identification
XA Wiring, Dimensions, Terminal Naming and Ratings 2
XA Function Blocks and Wiring Diagrams
Free drive.web Online Training Seminars
Design Statements
EMC Standard, EN 61326-1: 2006, Electrical Equipment for Measurement, Control and
Laboratory Use.
Emissions Class A, Commercial Equipment.
Immunity Table 2, Industrial Equipment.
LVD Standards, EN 61010-1: 2010, Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use.
smarty is an industrial controller designed for permanent installation by qualified professionals.
If it is used in a manner not specified herein the protection provided may be impaired.
smarty and its packaging contain recyclable materials
This device is designed to comply with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
This Class [A] digital apparatus is designed to comply with Canadian ICES-003. Cet appareil numerique de la
classe [A] est conforme à la norme NMB-003 du Canada.
Warning! It is essential that you read and understand this entire manual and the entire contents of the savvy
software Help menu before proceeding with your installation and configuration. See page 6 for savvy installation
instructions. For more information and to download manuals and software, go to www.driveweb.com or contact
us. See page 12.
Warning! Your use of savvy software and drive.web devices may cause motors and machinery to power up
with high Voltages or start or operate in an unexpected, dangerous or lethal way. It is essential that you are
completely familiar with all of the equipment and the system design before attempting to program or edit a
program or connect to any live device. It is also essential that a risk assessment is conducted to identify hazards.
Risks must be reduced to tolerable levels.
Warning! You are entirely responsible for the configuration or use of any drive.web product. By configuring
or using these products you agree to indemnify and hold harmless Bardac Corporation, its employees, directors,
officers, distributors, and resellers against the consequences of your configuration or use of the products.
Warning! Information in this manual is subject to change without notice. You are responsible for verifying the
proper operation of your smarty. Special care must be taken after loading new firmware or installing new options.
Warning! Avoid permanent damage to your smarty, never exceed any min or max values.
SMARTY, SAVVY, SAVVYPANEL, SPEEDY, BARDAC, and DRIVE.WEB are trade marks of Bardac
Corporation, registered in the U.S. and other countries.
HG504668 Iss1
dw25x-XA
smarty-XA
www.driveweb.com
drive.web automation
Page
1
2
3, 4
4
Page /4
®
U L
US
C
LISTED
QUYX
E472630
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bardac drive.web smarty-XA dw25 XA Series
Summary of Contents for Bardac drive.web smarty-XA dw25 XA Series
- Page 1 Warning! You are entirely responsible for the configuration or use of any drive.web product. By configuring or using these products you agree to indemnify and hold harmless Bardac Corporation, its employees, directors, officers, distributors, and resellers against the consequences of your configuration or use of the products.
- Page 2 drive.web automation Product Identification - smarty The XA option adds four independently-isolated, multipurpose, milliVolt-level inputs on dw25x-series universal automation controllers. For use with loadcell, milliVolt, potentiometer, RTD, tension transducer, and thermocouple signals. This option manual must be used in conjunction with the dw25x product manual, part number HG504266 Product Identification - Part Numbers Model number dw25x is appended with a five character extension.
- Page 3 drive.web automation Function Blocks and Wiring Diagrams Using software, instantiate function drive.web savvy blocks. E.g. I/O XAIO>XA1 Loadcell. Loadcell - Use with traditional metal foil loadcells and similar sensors requiring a full Wheatstone bridge at 0.2mV/V to 6.0mV/V; MilliVolt - Use with milliVolt sources. Choose Base Voltage from 10mV to 2048mV.
- Page 4 drive.web automation Function Blocks and Wiring Diagrams continued… RTD - Use with Platinum-type resistance temperature detectors. Choose 100Ω or 1kΩ sensor. Choose 2, 3, or 4-wire connection. Find ˚C to ˚F Converter in the Utility function block group. 2-wire RTD connection 4-wire RTD connection Tension Transducer - Use with piezoresistor-type strain gauges at 20mV/V to 500mV/V scaling.
Need help?
Do you have a question about the drive.web smarty-XA dw25 XA Series and is the answer not in the manual?
Questions and answers