SCH400 User’s Manual Revision Date: Aug.13.2024 Safety Information Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
SCH400 User’s Manual Revision Date: Aug.13.2024 Revision History Revision Date (yyyy/mm/dd) Changes V1.0 2024/08/13 First release Packing List Item Description Q’ty SCH-401 Substation 2U Fanless Rackmount Server Driver CD Ordering information SCH400-BB 2U 19” Power Automation Fanless Server Computer with Intel 10th Gen Core™ i3/i5/i7/i9 Processor, 2 × LAN(RJ45), 6x USB, 2 x DP, 1 x VGA, 1 x DVI-D, 1 x IPMI, 100V~240V AC-IN, 2 x 200W Redundant Power Supply, TPM Support, Operating Temperature -20~+60°C...
In order to meet the RoHS compliant directives, 7Starlake has established an engineering and manufacturing task force to implement the introduction of green products. The task force will ensure that we follow the standard 7Starlake development procedure and that all the new RoHS components and new manufacturing processes maintain the highest industry quality levels for which 7Starlake are renowned.
SCH400 User’s Manual Revision Date: Aug.13.2024 Chapter 1 : Production Introduction 1.1 Specifications System Intel 10th Gen. XEON®W-1200 ; Core® i Processor up to 35W Memory type 4 x DDR4 2933MHz UDIMM up to 128GB 1 PCI-E 3.0 x16 Expansion Slot 2 PCI-E 3.0 x 8 ( x4 signal)
SCH400 User’s Manual Revision Date: Aug.13.2024 Windows Windows 10/11 x64 Linux Ubuntu, Red Hat(By Request) Mechanical and Environmental Dimension 430 x 450 x 88 mm ( W x D x H ) Operating Temp. -20°C to 60°C Storage Temp. -40°C to 85°C...
SCH400 User’s Manual Revision Date: Aug.13.2024 Chapter 2 : Rear I/O Ports 2.1 LAN/IPMI port 2.2 VGA/DVI-D/DP port A VGA port and a DVI-D port are located next to DisplayPorts 1/2 on the I/O back panel. Use these connections for VGA and DVI displays. The VGA connector is on top and the DVI-D is on the bottom.
SCH400 User’s Manual Revision Date: Aug.13.2024 Chapter 3 : System Setup 3.1 Removing the Top Cover from the Chassis The sixteen screws on the top and side are used to secure the cover to the chassis. Remove these screws and put them in a safe place for later use 3.2 Installing PCIe Card...
SCH400 User’s Manual Revision Date: Aug.13.2024 3.3 Install the screws on the upper cover Attach the screws at sixten locations to complete the installation 3.4 2.5” Easy Swap SSD installation SCH-401 support four 2.5” Easy Swap SSD Use Tri-angle security key to open keylock and pull out the 2.5”SSD tray.
SCH400 User’s Manual Revision Date: Aug.13.2024 Chapter 4: AMI BIOS UTILITY This chapter provides users with detailed descriptions on how to set up a basic system configuration through the AMI BIOS setup utility. 4.1 Starting To enter the setup screens, perform the following steps: •...
Page 14
SCH400 User’s Manual Revision Date: Aug.13.2024 always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS setup screen is shown below and the following items will be displayed: The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured.
Page 15
SCH400 User’s Manual Revision Date: Aug.13.2024 The time setting is entered in HH:MM:SS format. Note: The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00. BIOS Version This item displays the version of the BIOS ROM used in the system.
Need help?
Do you have a question about the SCH400 and is the answer not in the manual?
Questions and answers