Advertisement

Quick Links

! WARNING !
IMPORTANT SAFETY INSTRUCTION AND GUIDELINES
• This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death.
• It is recommended that a person be 18 years or older to purchase this product.
Person under the age of 18 must have adult supervision or consent.
• Please read the manual and follow the instructions for using this product.
• Eye and face protection specially designed for paintball, must be worn by users
and persons within range at all times.
• Never look down the barrel or breech area of a marker.
• Always use barrel blocking device when the marker is not in use.
• Always chronograph this marker before playing paintball.
• Never shoot any marker at velocities exceeds 300 FPS (Feet Per Second), or
• Always chronograph the marker before playing.
tanks.
• Do not shoot at people, animals, houses, cars or objects that are not related to the sport
of paintball.
• Always keep the marker in Safe mode until ready for use.
• Only use 0.68 caliber paintballs with this marker.
• Always make sure the bolt is in the un-cocked position when marker is not in use.
liabilities from Azodin.
• This owner's manual should always accompany this marker for reference and should
be presented to the new owner if there is transfer of ownership.
.
will void all warranties and
! WARNING !
IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES
• Tank Regulators must be installed or removed by qualified personnel.
• All tanks must be retested before the expiration date.
property damage.
• Do not over pressurize. Do not expose pressurized tanks to temperatures in excess
of 130F° degrees (54°C).
• Do not expose tanks to corrosive materials and do not clean with caustic cleaners.
• Do not alter tanks in any way.
• Tanks heated up to a temperature of 250F° degrees (54°C) or more must be
• Keep air tanks out of reach of children.
• The Regulator should NEVER detach from the tank canister. Should this occur, seek
• Air tanks are to be used for the sport of paintball.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZII and is the answer not in the manual?

Questions and answers

Summary of Contents for Azodin ZII

  • Page 1 • Always make sure the bolt is in the un-cocked position when marker is not in use. will void all warranties and liabilities from Azodin. • This owner’s manual should always accompany this marker for reference and should be presented to the new owner if there is transfer of ownership.
  • Page 2: Quick Setup

    SAFETY ON SAFETY OFF Release the top button to turn off the ZII marker. To turn on the Electronic Safety, press the lower button once and display will read “SAFE”. To turn off Electronic Safety, press lower button once and the indicator will change to...
  • Page 3: Battery Installation

    BATTERY INSTALLATION EYE SENSOR SYSTEM ZII is compatible wirh 9 or 9.5 Volt Alkaline batteries. For best performance, please use named brand 9 or 9.5V battery. 1. Remove the Three Grip Panel Screws (S016) from the left side of grip panel (Fig 2A).
  • Page 4: Battery Level Indicator

    The Battery Level Indicator is used to show the current charge of Fire Mode 9: Breakout Mode -> RAMP Fire Mode 1: SEMI the battery in the ZII. When the battery is full, the indicator Fire Mode 10: Breakout Mode -> RESPONSE Fire Mode 2: PSP will display.
  • Page 5: Display Data

    FIRE MODES DATA DISPLAY DATA WHEN TOURNAMENT LOCK IS ENABLED WHEN TOURNAMENT LOCK IS DISABLED DISPLAY INFORMATION 1.FIRE MODE 1. SEMI 2. PSP 3. MILL 4. AUTO 1. EYE ON SPEED 2.SAFETY SHOT Number of Ball Per Second when Eye Sensor is ON 3.RAMP ACTION 2.6 T/S 5.0 T/S...
  • Page 6 The ZeRO-D is a revolutionary system that combines the Feather Striker and Mass The Brightness of Display Panel Flow Valve to achieve a low operating pressure. This gives the ZII an unparalled 14. ALARM shooting profile for a Stacked Tube Blow Back (STBB) Marker.
  • Page 7: Regulator Adjustment

    Turn the ZeRO-D Adjustment Screw (Z011) clockwise 2 full turns. NOTE: Contact tech@azodin.com for more information on tuning the ZII. Always use Velocity Adjuster (P023) to increse velocity first then increase input pressure. If there is a C-Clip, turn the ZeRO-D Adjustment Screw (Z011) counterclockwise till it meets the C-Clip.
  • Page 8: Maintenance

    WARNING: Never remove the internals of the marker while the tank is attached to the marker. Always remove the loader, the air tank, and all paintballs from the marker before disassembly. Perform the same procedure for the opposite side of the ZII.
  • Page 9: Troubleshooting

    Check to see that the ZeRO-D Cup Seal and the ZeRO-D Cup Seal Stem are tight and check for damage. Apply Azodin Lubricant or a Dow 33 base lube to the end of ZeRO-D Cup Seal (Z012) that enters the ZeRO-D Housing (Z041). Do NOT apply lube to the face of the Cup Seal that makes contact with the valve, this will cause leaks or recocking issues.
  • Page 10 ZENITH II PART LIST ZENITH II PART LIST ZENITH II SCREW PART NUMBER AND NAME ZENITH II SCREW PART NUMBER AND NAME CHART SIZE: 1:1 CHART SIZE: 1:1 M5 X 10L R011 MAIN BODY SCREW STRIKER O-RING (RED) M8 X 8L R012 VALVE RETAINING SCREW FRONT VALVE O-RING...
  • Page 11 INLINE REGULATOR EXPLODED VIEW Z087 R015 REGULATOR PARTS LIST ZeRO-D PARTS LIST PART NAME Z031 S031 P081 PART NAME P064 STRAIGHT ELBOW R031 P081 MAIN REGULATOR PH11 HP VALVE Z014 HOUSING Z087 ZeRO-D C CLIP P084 PZ82 REGULATOR SWIVEL 45 MOUNT Z013 Z011...
  • Page 12 ZII EXPLODED VIEW PZ51 A051 P041 P033 M4 x 6L R013 P024 P031 A013 R017 A211 P023 P025 R016 R016 P021 R011 A221 P033 PH11 P031 Z001 M8 x 8L R015 M4 x 6L M5 x 10L A062 M5 X 10L...

Table of Contents