Subscribe to Our Youtube Channel
Related Manuals for PSG Checkmate Quadro Horizontal Lifeline
Summary of Contents for PSG Checkmate Quadro Horizontal Lifeline
- Page 1 Quadro Horizontal Lifeline Part #: 30800 Do not throw away these instructions! Read and understand these instructions before using equipment! Instruction Manual...
-
Page 2: Table Of Contents
Safety Information Introduction Thank you for purchasing a Checkmate Quadro Horizontal Lifeline. This manual must be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency. -
Page 3: Applicable Safety Standards
Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M and OSHA 1910 standards for fall protection. Additionally, all applicable components meet or exceed ANSI Z359 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. -
Page 4: Product Specific Applications
Use of equipment in unintended applications WARNING may result in serious injury or death. Maximum 1 attachment per connection point. Product Specific Applications PERSONAL FALL ARREST: The Quadro Horizontal Lifeline may be used to support a MAXIMUM 4 personal fall arrest systems (PFAS) for use in Fall Arrest applications. -
Page 5: Limitations
Limitations FALL CLEARANCE: There must be sufficient clearance below the anchorage connector to arrest a fall before the user strikes the ground or an obstruction. When calculating fall clearance, account for a MINIMUM 2’ safety factor, deceleration distance, user height, length of lanyard/SRL, harness stretch, and all other applicable factors. - Page 6 Limitations COMPATIBILITY: When making connections with the Quadro Horizontal Lifeline, eliminate all possibility of roll-out. Roll-out occurs when interference between a hook and the attachment point causes the hook gate to unintentionally open and release. All connections must be selected and deemed compatible with the Quadro Horizontal Lifeline by a Competent Person.
-
Page 7: Components And Specifications
Components and Specifications Drawstring Rope Bag 4 x Aluminum O-rings 2 x Cross Arm Anchor Straps Rope Vise Tensioner Product Code Description 30800 Quadro Horizontal Lifeline Includes: 1 x Rope Vise Tensioner 1 x Drawstring Rope Bag 1 x 82ft / 25m Double Braided Rope 4 x Aluminum O-rings 2 x Steel Carabiners 2 x Cross Arm Straps... -
Page 8: Installation And Use
Installation and Use Prior to use, plan your system: 1. Ensure all PFAS equipment is selected and deemed compatible by a Competent Person. 2. Eliminate or minimize all risk of swing fall. 3. Determine desired location for the Quadro Horizontal Lifeline; ensure location is free of debris, rot, cracking, and hazardous materials. - Page 9 5. Pull initial rope slack through tensioner by hand. This step is only to remove excess rope slack, not to achieve proper tension. 6. Compress and hold tensioner handle and rotate handle until correct tension is reached. Apply force to handle in turning Compress Tensioner Handle direction only, as shown by arrow on handle.
- Page 10 Installation and Use Anchor Point Midpoint Anchor Point Span Length Quadro Horizontal Lifeline Tension Guide EXCESS SAG DO NOT USE FOR USE Span Length (feet) Span Length Required Sag at Midpoint 10’ 1.0” 20’ 1.3” 30’ 1.7” 40’ 2.3” 50’ 3.1”...
-
Page 11: Maintenance, Cleaning, And Storage
Maintenance, Cleaning, and Storage If the Quadro Horizontal Lifeline fails inspection in any way, immediately remove it from service, and contact Checkmate to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of the Quadro Horizontal Lifeline. -
Page 12: Inspection Log
Inspection Log Date of First Use: __________________. Product lifetime is indefinite as long as it passes pre-use and Competent Person inspections. User must inspect prior to EACH use. Competent Person other than user must complete formal inspection at least every 12 months. Competent Person to inspect and initial. This inspection log must be specific to one Quadro Horizontal Lifeline. -
Page 13: Labels
Labels 90780 (Rev. B) 115x105 QUADRO H O R I Z O N T A L L I F E L I N E AA12345 OSHA 1910 SERIAL NUMBER OSHA 1926 Subpart M 03/05/2020 D O M US Patent Pending MAX USERS UK Patent App No. -
Page 14: Safety Information
Safety Information Failure to understand and comply with safety WARNING regulations may result in serious injury or death. Regulations included herein are not all-inclusive, are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. - Page 16 Quadro Horizontal Lifeline Distributed by Engineered Fall Protection sales@engineeredfallprotection.com www.engineeredfallprotection.com Tel: (314) 492-4422 85116 (Rev L) 2020 © Pure Safety Group...
Need help?
Do you have a question about the Checkmate Quadro Horizontal Lifeline and is the answer not in the manual?
Questions and answers