U-Line JIFFY J-2000 Manual

π
H-4473
JIFFY J-2000
®
PROFESSIONAL DUTY
GARMENT STEAMER
TOOL INCLUDED
Wrench
TO USE
1. Attach hose with wrench (included) or spanner.
2. Fill water caddy with hot tap water.
NOTE: Cold water takes longer to preheat.
3. Plug into wall or base receptacle and turn switch to
ON position. Steamer is ready for use in two minutes.
NOTE: Steam may be applied from either the
inside or outside of fabrics.
4. Turn switch to OFF position when finished steaming.
• Rinse steamer out approximately every two weeks
or when sediment appears in the bottom of the
sight gauge.
PAGE 1 OF 3
1-800-295-5510
uline.com
OPERATION
FOR BEST RESULTS
• Straighten hose up and out frequently to keep clear
of condensation.
• Always hang hose upright when not in use.
• Unplug when not in use.
• For indoor use only.
• Do not run dry.
• Contact Uline Customer Service at 1-800-295-5510
for additional product information or instructions.
MAINTENANCE
• Flush steamer regularly with cleaner to prevent
sediment buildup.
Para Español, vea página 2.
Pour le français, consulter la page 3.
0724 IH-4473