Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Lowest
instructions
ambient
temperature
1.
SAFETY
The device shall not be used if it fails to operate correctly in accordance with the instructions and to seek advice from the manufacturer,
9
responsible vendor or an electrician.
WARNING! The charging cable is only suitable for electric and hybrid cars with a type 2 plug.
This charging cable can be used for electric and hybrid cars, hereafter referred to as 'cars'. It can be used from a charging
9
infrastructure intended for this purpose, or a 230V socket. Any other use is not permitted and is therefore regarded as improper use.
Before using the mobile charging station, you must read the operating instructions and the documentation for the car.
9
When the mobile charging station is being used, observe the instructions as described. Failure to do this can lead to personal injury or
9
damage to property, such as, for example, electric shock, short circuit or fire.
If in doubt, get a qualified electrician to check that the charging infrastructure or 230V socket is suitable.
9
WARNING! Any other use may cause damage to the device and expose the user to a risk of serious injury. The manufacturer is not
liable for any injury or damage resulting from improper use.
The device has been developed for consumer use and is not suitable for use in a commercial or industrial environment.
9
The product must only be used by people who have been trained to do so.
9
1.1.
PERSONAL SAFETY
Keep children and animals away from the mobile charging station. DO NOT allow children to play with the device. Cleaning and day-
9
to-day maintenance must not be performed by children without supervision. Children must be supervised to ensure that they DO NOT
play with the device.
Within the working area, the user is responsible for any damage or injury to third parties caused by the use of the device.
9
During operation, never point the device at yourself or other individuals.
9
Keep the device in a dry location and out of the reach of children.
9
1.2.
WORKING WITH THE DEVICE
DO NOT use the device while driving the vehicle.
8
Before setup or first use, check the device for any damage and DO NOT use unless in perfect working order.
9
DO NOT submerge the device in water. There is a risk of electric shock.
8
Keep the vent on the underside of the device clear during operation. DO NOT block the vent with your hands or fingers.
9
DO NOT cover the device or block any of the openings. Keep the opening clear and clean at all times to reduce risk of overheating.
8
Ensure that sand, dust and other small foreign objects cannot enter the air inlet or air outlet openings.
9
DO NOT leave the device in the car during hot weather. This could permanently damage the device.
8
The device becomes warm during use. There is a risk of burn injuries from touching the hot surfaces.
9
DO NOT operate the device near to flammable liquids or gases. DO NOT use the device in areas with a risk of explosion, e.g. near
8
flammable liquids, gases or powders.
Switch the device off and remove the mains plug from the socket in the following cases: when you are not using the device; if you are
9
doing cleaning work; if the connection cable is damaged; if foreign objects have got into the device or you notice unusual noises.
Only use the accessories supplied and recommended by the manufacturer.
9
DO NOT dismantle or modify the mobile charging station. This device must only be repaired by a maintenance technician.
8
DO NOT expose the device to any source of heat.
8
DO NOT store in places where the temperature can exceed 45
8
DO NOT connect the charging cable to a faulty/unsuitable socket, which, for example, is not designed for the continuous use required.
8
Protect the plug connections and plug devices from moisture and liquids.
9
DO NOT step on or drive over plugs, charging cable and connecting cables.
8
DO NOT jam or kink charging and connection cables.
8
DO NOT touch plugs with wet hands.
8
When the device is not being used, always put the cover caps on the plugs.
9
Always put the cover cap on, in accordance with the instructions.
9
1.3.
ELECTRICAL SAFETY
DO NOT carry the device by the cable. DO NOT unplug the plug from the socket by pulling on the cable. Protect the cable from heat,
8
oil and sharp edges.
If the cable is damaged, unplug the plug immediately from the socket. A damaged charging cable can lead to death or serious injuries.
9
Before each use, check the charging cable for damage (e.g. cracks). DO NOT use damaged charging cables.
9
© Jack Sealey Limited
ADJUSTABLE (3.5KW) TYPE 2 TO UK 3-PIN
PLUG PORTABLE EV CHARGER - 5M CABLE
EVAC2
MODEL NO:
IC-CPD with
IC-CPD may not
non-switched
operate if used on IT
protective
or other unearthed
conductor
systems
Original Language Version
C.
o
EVAC2
Issue 2 19/06/24
Need help?
Do you have a question about the EVAC2 and is the answer not in the manual?
Questions and answers