Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
Press the l button, and switch
to the focus check display
A white frame will appear where the AF
frame or face was when the focus was set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Switch frames.
Move the zoom lever toward k once.
●
The screen shown to the left will appear.
Press m to move to a different frame
●
when multiple frames appear.
Change the magnification level or
location.
●
Use the zoom lever to change the display
size, and the opqr buttons to change the
display position while checking the focus.
Pressing the n button resets the
●
display to Step 1.
(p.
45).
109