Skip to Page 12 if you are not using Windows XP or prefer not to use Windows
XP's Wireless Zero Configuration Service.
To configure a WEP/WPA encryption key, select
◗
the appropriate wireless network and click the Con-
figure button.
From the pull down menu, select the appropriate
◗
Network Authentication and Data Encryption for the
wireless network. Enter and confirm the Network
Key and Key Index. Click the OK button when
finished.
■ Note: Buffalo Technology recommends that
users of the Wireless Zero Configuration Service
upgrade to the latest version freely available at:
http://www.microsoft.com.
For advanced support in using Window's XP's
Wireless Zero Configuration Service, refer to the
Buffalo Support Web Site: http://www.buffalotech.
com/wireless/support
8
Introduction