Client Manager - Buffalo WLI2-PCI-G54S User Manual

Client Manager

Use Client Manager to configure your wireless network. Use Client Manager to
survey and connect to available access points, enable and use WEP encryption,
and create connection profiles.
■ Note: Client Manager does not function properly if the Windows XP Wireless
Zero Configuration Service is enabled.
Installing Client Manager
Insert the AirNavigator CD. The
◗
AirNavigator dialog box will open auto-
matically. If the AirNavigator dialog
box does not open automatically,
select Start»Run and enter D:\Setup.exe
in the Open field to open the dialog box
manually. D: represents the letter as-
signed to the CD-ROM drive. If another
letter is assigned to the CD-ROM drive,
your command should reflect that
difference. Click the OK button. Se-
lect Install Client Manager to launch the
InstallShieldWizard.
12
Client Manager