Download Print this page

Backyard Expressions Oakmont LED Pergola 906135 Care And Maintenance Instructions

Advertisement

Quick Links

Oakmont LED Pergola
UPC: 906135
Shade Structure Care and Maintenance Instructions
Shade structure is NOT meant as a year round structure. Shade structure should
be taken down and stored in a dry location during winter.
Do NOT leave cover on year round.
Remove cover/top with poor weather (rain, winds, snow, etc.) is coming.
It is recommended to only use the cover/top when the shade structure is being
used. Roll up and store cover/top when shade structure is not in use to help
preserve the cover/top/
To clean clover/top please use mild soap and water
DDI is not responsible for damage to shade structure due to Acts of God.
Wind conditions can cause damage to the shade structure.
Warning
Please read all instructions prior to assembly and use.
Some parts may contain sharp edges. Wear protective gloves if necessary. It is
recommended to have 3 people available for a safe assembly.
Keep all children and pets away form the assembly area.
Begin assembly no less than 8 ft. form any obstruction such as a fence, house,
overhanging branches, laundry lines and electrical wires.
Install on level ground.
The gazebo is intended for decorative and sunshade purposes and is not
considered a permanent structure. It is not meant to withstand extreme
weather conditions, including high wind, heavy rain or snow. Weather
related damages will not be covered by the manufacturer.
Keep all flame and heat sources away from material. It is not fireproof. It will
burn if left in contact with any flame source.
Do not hang heavy objects from the frame structure of the Garden
Pergola. This may cause tipping or damage to the frame.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Oakmont LED Pergola 906135 and is the answer not in the manual?

Questions and answers

Summary of Contents for Backyard Expressions Oakmont LED Pergola 906135

  • Page 1 Shade Structure Care and Maintenance Instructions Shade structure is NOT meant as a year round structure. Shade structure should • be taken down and stored in a dry location during winter. Oakmont LED Pergola Do NOT leave cover on year round. •...
  • Page 2: Item Description Qty

    Parts List ITEM DESCRIPTION ILLUSTRATION Post 1 Post 2 Post 3 Base Cap Flange Base Supporting Tube Hook Top Cap Long Crossbar Short Crossbar Short Roof Beam Weight Bar Stake Short Screw M6x15mm Medium Screw M6x60mm Long Screw M6x80mm Hex Wrench Self-tapping Screw M5x12mm Solar Panel...
  • Page 3 Note: The wire gets through the most central holes of the top cap(F) and short crossbar set (H). A1 / A2 / A3 1. Insert base cap (B) onto post (A1, A2 or A3). Then set post onto Part C and secure with screws (M).
  • Page 4 Note: The wire gets through the most central holes of the long crossbar set (G). 5. Place the Short Roof Beam (I) on top of the Long Crossbar (G) and secure using You need 3 persons for this step. Medium Screw (N). Repeat for remaining 4 pcs of Short Roof Beam. 4.
  • Page 5 10. Put the top (K) on the pergola and put the weight bar (J) into the top (K). 8. Attach the supporting tube (D) onto crossbar set (G, H) and post (A1,A2,A3) with Use the remote control (T) to turn on and off the lights. short screw (M) as shown.
  • Page 6 Replacement parts ITEM DESCRIPTION ILLUSTRATION light lampshade Small Screw M4x8mm Post cap Self-tapping Screw st4x12mm As shown above, fasten the lamp (U) to the cover (X) with a small screw (W). The lamp wire passes through the center hole of the cover (X); and the cover and the post are fixed together with the tapping screw (Y).
  • Page 7 Please help us give you the best possible service by emailing your ddiparts@ddicorp.com parts & service needs to: Emails are responded to daily and are the most accurate way to communicate item/parts needs. This form is also available online at: http://ddiretail.com/contact-us/ Customer Name Mailing address...