Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Labino UVG2 2.0
Summary of Contents for Labino UVG2 2.0
- Page 1 Labino Torch Light UVG2 2.0 | UVG3 2.0 | White OPERATING INSTRUCTIONS...
-
Page 2: Table Of Contents
Labino AB has been committed to high standards of quality in the design and manufacture of new innovative products, helping NDT professionals worldwide to make the world a safer place. Labino AB high quality lights are designed to comply with all relevant international and ASTM standards, and are distributed to over 55 countries worldwide. -
Page 3: Models Available
Labino offers six different Torch Lights. Five UV versions and one white light torch. UVG2 2.0 is equipped with a clear glass while UVG3 2.0 is equipped with a white light block filter (used for NDT). UVG2 2.0 is available in two different versions and UVG3 2.0 is available in tree different versions as indicated below. -
Page 4: Handling Of The Equipment / Intended Use
5. HANDLING OF THE EQUIPMENT / INTENDED USE Although the lamp is very sturdy, it should be treated with a certain amount of care, because it contains electrical and optical equipment. The lamp can be switched on and off at any interval. Waterproof Tested waterproof classification ”IP68 1.1m, 31 minutes”... -
Page 5: Technical Data
UVG3 2.0 Midlight ≈ 8 000 µW/cm² UVG3 2.0 Floodlight ≈ 4 000 µW/cm² Visible light from UV LED UVG2 2.0 Spotlight ≈ 90 Lux (9 fc) at a distance of 380 mm (15") UVG2 2.0 Midlight ≈ 14 Lux (1.4 fc) UVG3 2.0 Spotlight ≈... -
Page 6: Warning And Uv Safety
UV sources. Safety standard According to EN 62471 all models of Labino UVG2-3 2.0 are classified in Risk Group 3, High Risk, with the exception of UV3 2.0 Floodlight that is classified in Risk Group 2, Moderate Risk. -
Page 7: Warranty
Labino AB guarantees that the armatures will be free from defects when delivered. Labino AB’s obligation under this warranty is limited to repairing or replacing, at the option of Labino AB, any part(s) of the product which, if properly installed, used and maintained, proves upon factory examination to have been defective in material or workmanship. - Page 8 Repairs • If your Labino lamp needs service or repair it shall be sent to the nearest local authorized service center. It will benefit you with faster service and reduced freight costs by using local service centers. A complete list of service center locations can be found on our website at www.labino.com.
-
Page 9: Declaration Of Conformity
Address: Fågelsångsvägen 16, SE-186 42 Vallentuna, Sweden Tel: +46 (0) 8 83 90 70 E-mail: labino@labino.com This declaration is issued under the sole responsibility of the manufacturer. The object of the declaration described above is in conformity with the relevant... - Page 10 **Only the model UVG3 2.0 Floodlight is in compliance. Additional Information: This Declaration of Conformity complies with the requirements of our ISO 9001:2015 Management System. For and on behalf of Labino AB: Lisel Athanasiadis Managing Director Place of Issue: Fågelsångsvägen 16, 186 42 Vallentuna, Sweden...
-
Page 11: Labino Ab Quality Declaration
11. LABINO AB QUALITY DECLARATION Labino Quality Management Systems: Labino is certified in accordance with the following standards: Standards Certifying body Regarding ISO 9001:2015 DNV, Sweden Management Quality System ISO/IEC 80079-34 Intertek, UK Explosive Atmospheres – Application Cleeve Road of quality systems for equipment... - Page 12 DISTRIBUTOR: Labino AB shall not be held liable for any errors or omissions resulting from the test procedures that were used in validating performance of any Labino AB product nor for unforeseen errors or omissions in digital or printed material.
Need help?
Do you have a question about the UVG2 2.0 and is the answer not in the manual?
Questions and answers