Subscribe to Our Youtube Channel
Related Manuals for Redback C 8890D
Summary of Contents for Redback C 8890D
- Page 2 Wireless Receiver Connection Via Mic In...
- Page 7 Manual: Use this mode to select free channel by manually. Scan: Use this mode to set free channel by auto-scan function. Preset: Use this mode to set multiple constructions by preset group. SYNC: The synchronization process is actuated. GP: Display selected preset group. CH: Display selected preset channel.
-
Page 13: Channel Selection Modes
Channel Selection Modes: The receiver operates in three channel selection modes. Manual Channel Selection: This mode allows you to manually select interference free channels. If two transmitters are being used in the same area, ensure the selected frequencies are at least 10 channel spaces apart. - Page 14 Auto Scan Channel Selection: This mode automatically searches for an interference free channel. Note: Have the transmitter 1m from the receiver when using this function. Use the button to select the SCAN mode so that the ‘SCAN’ marker appears on the LCD display.
- Page 15 Preset Channel Selection: This mode is used when multiple C 8890D system are used in the same area. Each receiver is setup to use PRESET mode. This allow each receiver to select a channel in one of four preset groups. Within each preset group is eight selectable channels. Once configured, up to eight transmitters and receivers may be used in the same location without interference.
- Page 16 Charging the handheld microphone / bodypack transmitter Use the USB Type-C cable (not included) and a USB AC adaptor (not included) - Connect the Type-C cable to a USB AC adaptor and the handheld microphone / bodypack transmitter. - During charging, the handheld microphone / bodypack transmitter will be turned off.
-
Page 19: Sync Mode
SYNC Mode: Sync mode is designed to avoid having to manually match channels on your receiver and transmitter. This speeds up the set up process, especially in multi-system environments. Follow these steps to synchronise receiver and transmitter frequencies: 1. Ensure receiver and handheld mic/beltpack are switched on and within 1m of each other. 2. - Page 20 Wireless Receiver Connection Via Mic In Wireless Receiver Connection Via Mic In SPEAKER WIRELESS AUDIO MIXER RECEIVER AMPLIFIER Mic IN Line IN Line OUT 3 Pin XLR Lead SPEAKER Wireless Receiver Connection Via Line In WIRELESS AUDIO MIXER RECEIVER AMPLIFIER Mic IN Line IN Line OUT...
- Page 21 Antenna Antenna C 8843A Bracket C 8842A Booster...
- Page 23 C 8893D / CL8893D C 8892D / CL8892D C 8893D / CL8893D C 8892D / C 8893D DC 1.5Vx2 AA(UM-3) or rechargeable CL8892D / CL8893D C 8892D / C 8893D 120±10mA/3V CL8892D / CL8893D 115 10mA at 3.7V...
Need help?
Do you have a question about the C 8890D and is the answer not in the manual?
Questions and answers