Using A Memory Card; Technical Specifications - Modecom FreeTAB 9706 IPS2 X4+ Quick Start Manual

MODECOM FREETAB
2.3 Lock/unlock the screen (sleep mode)
To save battery, you should put your tablet in sleep mode by turning
off the LCD display. To do this, shortly press the power key. Press it
again to wake up the screen.
2.4 Connect to computer
You can connect your tablet to your computer with the supplied
USB cable so you can transfer media files.
3. Using a memory card
3.1 Insert the micro SD memory card to the device
: The device supports micro SD cards in standard SD / SDHC
` To insert the card, set the connector tab toward the front of the unit
(printed toward the back of the unit)
- To remove the card, press the edge of the card to release the card
to release the safety and pull the card out of the slot
Warning: When you load a file with the micro SD card, it can not be
removed from the slot and can cause a malfunction
4. Technical Specifications
Procesor CPU | ARM Cortex A9 (dx 1.6 GHz)
Procesor GPU Mali400MP4 (4x 533 MHz)
Operating system | Android 4.1 (Jelly Bean)
Memory RAM 2 GB DDR3
Memory Flash 8/16 GB Flash MLC
Card reader microSD/SDHC (do 32GB microSDHC)
Touch panel Capactive (10 points)
LCD Size 9,7" IPS2
LCD Resolution 2048 x 1536 pixels
LCD Aspect ratio 4:3
www.modecorn.eu