Using A Memory Card; Technical Specifications - Modecom freetab 9704 IPS X4 Quick Start Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
MODECOM
FREETAB
To save battery, you should put your tablet in sleep mode by turning
off the LCD display. To do this, shortly press the power key. Press it
again to wake up the screen.
2.4 Connect to computer
You can connect your tablet to your computer with the supplied
USB cable so you can transfer media files.
3. Using a memory card
3.1 Insert the micro SD memory card to the device
* The device supports micro SD cards in standard SD / SDHC
* To insert the card, set the connector tab toward the front
of the
unit (printed toward the back of the unit)
* To remove the card, press the edge of the сага to release
the
card to release the safety and pull the card out of the slot
Warning: When you load a file with the micro SD card, it can not be
removed from the slot and can cause a malfunction
4. Technical Specifications
AllWinner A31 Cortex-A7 4 x Core 1.0 GHz
PowerVR SGX 544 MP2 8 x Core
Operating system
| Android 4.1 (Jelly Bean)
Procesor
Memory RAM
2GB DDR3
Memory Flash
16GB Flash MLC
Card reader
microSD/SDHC (do 32GB microSDHC)
Touch panel
Capactive (10 points)
LCD Size
9,7" New Generation IPS
LCD Resolution
2048 x 1536 pixels
LCD Aspect ratio
4:3
Keys
Power, Home
www.
modecom.eu

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the freetab 9704 IPS X4 and is the answer not in the manual?

Table of Contents